< Please see 'Allen & Heath iLive Resetting network defaults' video on YouTube >
All 3 elements of an iLive system, the iDR MixRack, the Surface CPU and the Touchscreen computer, can have their network settings reset to the factory default.
We recommend that all 3 resets are performed to ensure that all the factory defaults are recalled.
To perform a network reset on the iDR MixRack:
Power OFF.
1. Push a small pin through the Reset hole. There is a momentary switch inside. Check that the switch is NOT latching
2. Hold the switch in.
3. Power ON – hold the switch in for 15sec.
4. Release switch.
Mix rack network address is now set to 192.168.1.1
To perform a network reset on the iLive Surface:
Power OFF.
1. Push a small pin through the Reset hole. There is a momentary switch inside. Check that the switch is NOT latching
2. Hold the switch in.
3. Power ON – hold the switch in for 15sec.
4. Release switch.
The surface network address is now set to 192.168.1.2
To perform a network reset on the iLive Touchscreen Computer:
1. Navigate to the 'Network Setup' page
2. Hit the 'Reset Network Settings' button.
The surface network address is now set to 192.168.1.3
If you are still suffering from connectivity issues after performing the above procedure please contact your local distributor for Technical Support