M-DL-AES10O, M-DL-AES2I8O, M-DL-AES4I6O, M-DL-AES6I4O can be fitted to any Allen & Heath Avantis or dLive I/O Port. They provide a digital AES3 (AES/EBU) interface to other audio equipment.
Fitting the card
- Switch the system off.
- Remove the 4 screws securing the I/O Port blank panel on the dLive MixRack / Surface or Avantis mixer.
- Slide the card into the slot and press it firmly into the mating connector.
- Secure the card by tightening the 4 captive thumb screws.
Setting clock and patching signals
Use the dLive or Avantis I/O screen to patch signals from or to the I/O Ports.
Use the I/O Port screen to access the sample rate options for the AES card. You can switch the Sample Rate Conversion off for the AES3 inputs, and select the sample rate for the AES3 outputs.
ⓘ Only turn off SRC if the AES sources and the dLive/Avantis are sharing the same 96kHz clock. You can sync dLive/Avantis from the first AES input on the AES card using the Audio Sync screen.
ⓘ For more information on dLive or Avantis setup and functions please refer to the Firmware Reference Guides available for download at www.allen-heath.com.
ⓘ M-DL-AES cards require dLive firmware V1.5 or higher.
Front panel
|
AES3 Inputs Stereo digital inputs on XLR and status LED for SRC Bypass. |
|
|
AES3 Outputs Stereo digital outputs on XLR. The card can be set to output at 44.1, 48, 88.2 or 96kHz. |
M-DL-AES6I4O
M-DL-AES4I6O
M-DL-AES2I8O
M-DL-AES10O