Scene memories

Scene memories store the following parameters and settings:

Input channels

• Preamp Gain, Pad, +48V
• Digital Trim, Polarity
• Stereo Image
• HPF and LPF Filters
• Insert In/Out and operating level
• PEQ
• Gate and Compressor
• Level (channel fader)
• Mute
• Pan
• Routing assignments, sends and Pan
• Delay
• Direct Out level
• DCA / Mute Group assignments
• Name & Colour

FX Sends, FX Returns (Includes RUFX)

• Level
• Mute
• Routing assignments, sends and Pan
• DCA / Mute Group assignments
• Name & Colour

DCA

• Assignments
• Level
• Mute
• Name & Colour

Mute Groups

• Assignments
• Mute

MIDI Strips

• MIDI messages
• Name & Colour

Mix channels

• Ext Input Gain, Pad, +48V
• Digital Trim, Polarity
• Insert In/Out and operating level
• PEQ
• NEQ
• Compressor
• Level (channel fader)
• Mute
• Pan
• Routing assignments, sends and Pan
• Delay
• DCA / Mute Group assignments
• Name & Colour
• Source point

FX

• FX parameters for each unit
• PEQ

RUFX

• FX parameters for each unit
• PEQ
• Pre/Post Dynamics

Others

• AMM Settings
• IP Controllers settings
• Source Select settings
• Dyn8 routing and parameters
• Softkeys settings
• GPIO settings
• Patchbay – Input source, Inserts, Outputs, Tie lines.
• Virtual SoundCheck settings
• I/O Port – Option card settings
• Output Polarity
• Digital Out Sample Rate
• Talkback HPF
• Ganging
• ME Stereo configuration for Monitor outs
• Global Direct Out source
• Global Tap Tempo
• Global Key and Scale
• Strip Assigns for each bank
• Mixer illumination
• Soft Rotary controls

Show memories

Show memories store the following settings:

Current settings

• All settings listed above, stored at the time the Show was last saved

Scenes

• All Scenes (1-500) including names and descriptions
• Scene Recall Filters
• Global Scene Safes
• Cue lists
• Current cue list
• Scene options (Editing Confirmation, Auto Store, Auto Increment, Track Embedded, Go on Touch)

Libraries

• All User Libraries

Setup

• Mixer Configuration
• Input Stereo Configuration
• Audio Clock source
• BNC Wordclock out option
• Talkback assignments, source assignment, HPF and Dim option
• SigGen assignments and settings
• AES out sample rate options
• AES input SRC bypass
• Strip Assign ‘Sync Selected Layer with Surface’ option
• Custom Rotary functions
• Layer Link
• Surface preferences (Display parameter on LCD, No Sends on Faders)
• Mix Follow Pan

PAFL

• PAFL preferences (Additive mode, IEM Mix to Headphones, Mix Follows PAFL, Sel Follows PAFL, AFL option)
• PAFL Delay and Trim
• Mains to PAFL levels
• External Input Talk to PAFL switch and Trim
• SIP Safes

Others

• PEQ / Comp order
• Custom meters
• MIDI Channel number
• Input PEQ 20-20k option
• Mix PEQ 20-20k option
• Fill PEQ graphs option
• I/O Screen options
• RTA ‘Show Peak Band’ option
• ‘Enable Preamp on Surface’ option

Settings not stored in Shows

The following settings are not stored in Show memories. These settings are local to the Avantis.

• Network settings
• Event logs
• User Profiles