In June 2012 the metalwork for the GS-R24 was updated to improve performance.
As such, the Rev.2 GS-R24 mixer and option cards are NOT compatible with the previous revision GS-R24 mixer and option cards.
|
|
- A&H part numbers - |
|
|
Description |
Revision 2 metalwork |
Revision 1 |
|
Mixer with Non-Motorized Faders |
GS2-R24 |
GS-R24 |
|
Mixer with Motorized Faders |
GS2-R24M |
GS-R24M |
|
|
|
|
|
FireWire Interface Module Card |
M-GS2R24-FIRE-A |
M-GSR24-FIRE-A |
|
|
|
|
|
Balanced Analogue Interface Module Card |
M-GS2R24-ANA-A |
- |
|
Unbalanced Analogue Interface Module Card |
- |
M-GSR24-ANA-A |
NOTE: There is no difference in the performance between the 2 models, the metalwork was updated to improve EMC performance.
For additional information/support please contact your dealer or local A&H distributor
Below is the User Guide for the Unbalanced Analogue Interface Module
(M-GSR24-ANA-A) and the Balanced (M-GS2R24-ANA-A)
Unbalanced (M-GSR24-ANA-A)
User Guide AP8348_1
Analogue Input & Output 37 way D connector pin ident. (p.8)
Balanced (M-GS2R24-ANA-A)
User Guide AP9109_1
Analogue Input & Output 25 way D connector pin ident. (p.8)