Knowledgebase: SQ Series
Working with the Matrix
Posted by Alex Skinner, Last modified by Alex Skinner on 09 March 2018 02:50 PM

When using delay or infill speakers, a matrix can be used to send a mix bus at a separate level. Delay, Trim, Polarity, Insert, PEQ, GEQ and compressors are available on each matrix for processing.

To send a mix bus to a Matrix

  • Press the Sel key of a Matrix channel
  • Press routing
  • Select the Matrix Sources block
  • Turn a mix bus on
  • Turn the bus up on the screen


  • Press the Sel key of a mix bus
  • Press and hold the CH to All Mix key
  • Turn the mix bus up on the required matrix channel