Knowledgebase: Xone Series > Xone:92
XONE:92. Converting phono inputs to line inputs?
Posted by Al Crombie, Last modified by on 21 February 2010 04:53 AM

Q:
Xone:92 - Can I convert my phono inputs into line inputs?
 

A:
You can convert any of the RIAA phono pre-amplifier inputs to line level
by removing four jumper sleeves from the channel PCB assembly that you want to convert. 

For details please refer to the Installer Link Options* (p.36/37) of the Xone:92 User Guide <click here>

(*other options available are Input Gain Disable, Filter Disable, Midi - Filter 2 only)

As stated in the User Guide:

CAUTION : The following service instructions are for use by qualified personnel only.
To reduce the risk of electric shock do not perform any servicing other than that
described in the operating instructions unless you are qualified to do so.


Refer all servicing to qualified service personnel.

 

Please contact your dealer or local A&H distributor to arrange changes to be made,
you might invalidate your warranty if the work is carried out by unqualified service personnel.

 

 

keywords X92 Xone92 jumpers modifications