GL4800 versions [1] of below ARE backwardly compatible. MONO I/P STEREO I/P GROUP 1-4 GROUP 5-8 GROUP L-R MONO PCB ------------------------------------------------------------------------------------------------- GL4000 versions...
Available to order via your dealer or local Allen & Heath distributor [1] PART NO. DESCRIPTION AP6146 DUST COVER GL4800 24CH AP6147 DUST COVER GL4800 32CH AP6148 DUST COVER GL4800 40CH AP6149 DUST COVER GL4800 48CH keywords: accessories accessor...
GL4800-32A 3.23 3.23 GL4800-32A 3.68 3.76 GL4800-40A 4.13 4.29 GL4800-48A 4.58 4.82 For B and C versions of above add +0.04 +0.06 For D versions of the above add +0.08 +0.12 Littlite +0.29 +0...
The RPS11 [1] power supply - was available with a choice of connections, depending on which desk it is powering. RPS11 Cable part no. 002-223 (10 Pin Male to 10 PIN Female output) RPS11-3C Cable part no. 002-225 (10 Pin Male to 5 PI...
Many Allen & Heath products can have their busses linked so as to expand input/output capability. We call this Sys-Link(tm) and it requires the purchase and fitting of special PCBs to each mixer. The signals are presented on D connectors on the rear of...
The Master and Slave both require their own distinct Sys-Link(tm) option card. - Please see attached chart If you have any questions please contact your dealer or local Allen & Heath distributor [http://www.allen-heath.com/distributors] keywords: SysLink...
An LED alternative for replacing the incandescent bulbs in the ML and GL series mixer meterbridges. This can be fitted to the individual meters in the mixer as an alternative to fitting the Meter bulb * The cost of the LED option is also cheaper than ...
To configure your Allen & Heath desk for use with an external FX processor carry out the following steps. * Connect an Aux* output to the mono or left input of your external FX processor. * Connect the stereo LR returns from your FX processor to a s...