Knowledgebase
35dLive
26SQ Series
116Qu Series
78GLD Series
109ZED Series
157Xone Series
33ME System
9GR Series
25MixWizard4 Series
94iDR Series
28GL Series
14XB Series
22GS Series
165iLive
28ICE Series
25PA Series
44PL Series
22Install
Custom Control
4AHM series
61Audio Networking
5Avantis
18Software
11Power Supplies
109Accessories
19General
235Discontinued Products
Knowledgebase : iDR Series > iDR - General
Q:
Where can I find iDR technical help and training?
A:
In the first instance please visit our iDR Training page [1] which
covers the basics of setting up a configuration,
programming presets and connecting PL devices [2]:
There are additional res...
Q:
Can the iDR unit's Real Time Clock compensate automatically for
changes to the time caused by Daylight Savings Time,
or is a service call to the job site necessary to connect and change
the iDR clock so that the scheduled events remain accurate?
...
For instructions on how to connect to an iDR-4 / iDR-8 over the
internet:
Please Click Here [1]
keywords: idr4 idr8
Links:
------
[1]
http://109.203.103.60/tech/iDR/iDR_4%20iDR_8%20connecting%20to%20an%20iDR%20over%20the%20internet%20kb%20arti...
Q.
Can I run the iDR signal generator offline?
A.
The iDR signal generator is located in the iDR system hardware, not in
the offline simulator,
and therefore you will need to be physically connected to an iDR unit
to use this
Relay switch for on/off action PL-8
[1]
Links:
------
[1]
http://cpc.farnell.com/jsp/endecaSearch/searchPage2.jsp?Ntt=HK00258&Nty=1&N=411&Ntk=gensearch
Q.
If I update the firmware in an iDR unit, will I lose my settings?
A.
No, you shouldn't lose any programming in the unit.
The firmware code sits in a different area of memory to that of the
programmed data, which is not overwritten during a code updat...
Problem - PL Client [1]: Not loading DRD file
Solution - Remove spaces from the .drd file name
keywords: iDR plclient
Links:
------
[1]
http://www.allen-heath.com/uk/products/pages/subLinkdetails.aspx?catid=iDRSeries&sid=9
How to set up an offline Telnet session:
1. Start an offline System Manager session (i.e. connect to an offline
iDR-8 or iDR-4).
2. From the Start Menu select Run...
3. In the box type CMD
4. From the DOS prompt type TELNET
5. From the Mic...
NOTE: ALLEN
\">http://cpc.farnell.com/_/hlrtoo/handy-little-relay-toggle-on-off/dp/HK00258
[1]
Description
* Handy Little Relay Toggle ON/OFF
* This versatile version of the handy little relay gives a latching
toggled on/off action that is activ...
We have a PDF detailing iDR-4 & iDR-8 system latency
keywords: iDR4 iDR8
Links:
------
[1]
http://109.203.103.60/tech/iDR/iDR_8%20iDR_4%20latency%20kb%20article.pdf
iDR-Switch, PL, output expander iDR-Out.
Pager.
Use one PL or iDR-Switch to trigger pager in two iDR units.
Please Click Here [1]
keywords: idr4 idr8 idrout idrswitch
Links:
------
[1] http://109.203.103.60/tech/iDR/Paging across two units.pd...
Q: Can the iDR system generate a chime or gong, or short audio clip
when the user starts to speak into a mic, and when they stop?
A: The iDR series does not generate such as system of gongs or other
audio, so you would need to investigate an external...
iDR can be used as a dedicated loudspeaker management system.
Although iDR isn't a dedicated product for this role it does have
functions to enable crossover settings, phase correction, etc to be
utilised.
It is possible to set Crossovers filters on ...
Q:
I'd like to know if I have to add an iDR-OUT for output expansion is
it mandatory to add an iDR-IN as well to the iDR-8 processor?
A:
It is not necessary to add an iDR-IN when you add an iDR-OUT.
The expanders work as independent additional modules...
Q.
Does the iDR system support digital input/output?
A.
The iDR system has digital buss connections for connecting digital
signals to/from the iDR-In, iDR-Out and other iDR-8 units,
but at the time of writing (February 2004) there are no direct me...
Q:
I'm having problems assigning or unassigning a PL-11 in System Manager
A:
From firmware version 1.71 it is possible to assign PL-11 from the
communications options menu.
Once assigned, if an older version configuration is loaded, the older
configu...
How do I set a static IP address for my PC or Mac?
If you are using a PC: 1: Go to - Control Panel - Network Connections
2: Right click on your Ethernet adapter connected to the Ethernet port
on the PC - Click on 'Properties'
3: Scroll down the connectio...
The internal requirements of the iDR-8 and iDR-4 series mixers mean
that the
maximum available dimensions of the DIN 41494 Part 1 (IEC 297-1 2nd
edition) [1] standard are required.
Correspondingly some 19" racks which do not conform to DIN 41494 Part...
iDR systems can be controlled via a PC using PL Client [1], an
interface which can be designed in PL Designer.
PL Client is a lite version of iDR System Manager, so a customer does
not have access to the full tools offered by iDR System Manager.
The...
If you're looking to control the iDR from an existing PC network then
the PL Client [1] software may be of interest.
This is a virtual-wallplate GUI controlling levels, mutes and patches
etc. which can be run on a user's machine,
for local controls, or ...
Q:
Where can I find the RS232 codes for using iDR with AMX and Crestron
controllers?
A:
This information is detailed in the iDR Sys-Net Control Protocol
document which is viewable from the iDR System Manager program group
in the Start Menu.
The MI...
Q:
I have an iDR-8 with SW version 3.6 beta, and PC with v3.61. iDR-8
will not communicate either via ethernet or serial port.
In either case, the Preferences dialogue gives no options for comms
port selection or updating code. Cannot find V3.6beta o...
The PL Calculator is a Microsoft Excel spreadsheet that calculates the
viability of a PL network.
For more information see the "Using PL Calculator" pdf file
available to download in the documents section on the product pages
for iDR-4 [http://www.alle...
Help Desk Software by Kayako