RSS Feed
Knowledgebase : PA Series > General PA
Firstly please try performing a reset on the FX board; Turn on the mixer whilst holding the 'select' button, this will usually restore functionality. If the FX are still unresponsive please contact your local A">keywords PA12 PA12-CP PA12CP PA20 PA2...
The SPDIF output is 24-bit, 48KHz, and is set to Professional mode, so no Copy Protection bit is set, and duplicates of the digital recordings can be made.
There's no reason why this shouldn't work. You can 'patch in' the controller by connecting the Slave Outputs of the PA to the inputs of the controller, and take the outputs from the controller to the AMP In connectors, thereby putting the controller in...
To configure your Allen & Heath desk for use with an external FX processor carry out the following steps. * Connect an Aux* output to the mono or left input of your external FX processor. * Connect the stereo LR returns from your FX processor to a s...