RSS Feed
Knowledgebase : iLive Digital Series > Operation
NOV 2012 V.1.9 is a major new feature release for iLive Modular and Fixed Format systems. [http://www.allen-heath.com/media/iLive-firmware-V1.9-Important-Notes.pdf] [http://www.allen-heath.com/UK/SoftwareDocuments/iLive%20firmware%20V1.9%20Important%2...
Although the vast majority of USB flash drives will operate flawlessly with the iLive system there are a small number of USB keys which may not be recognised. We suggest that any USB key used with the iLive system is formatted using the FAT32 [http://en....
You can program the PL-10 in iLive Editor so each button recalls a scene, each of the scenes will be used to change the PL-Library, each PL library change which Aux sends the rotaries are controlling. In the scene manager contents, name however many ...
To transfer individual, or multiple scenes to, and from USB stick: 1. Utility - Configuration tab - USB Scene Transfer button. 2. If there is no USB stick inserted, or if the stick isn't going to work for whatever reason, there will be a message...
ILIVE / IDR POWER CONSUMPTION These are maximum power consumption figures which will be considerably more than typical power consumption. iDR s/box format AC mains max power (W) 64 191 48 163 32 135 16 70 in...
You need to do the network reset descirbed in the PDF. If the unit will still not connect, you need to connect a laptop with a static IP address of 192.168.1.10 and 'ping' Touch screen computer 192.168.1.3 Surface CPU 192.168.1.2 iDR-32 CPU 192.168.1.1 ...
Possible noise with Sennheiser EW300 G1 & G2 IEM
Diagram of cable modification to combat noise when using Sennheiser IEM with iLive Click Here [1] Keywords: In Ear Monitoring Links: ------ [1] http://109.203.103.60/tech/ilive/Sennheiser IEM noise_cable mod.jpg
Q: Surface and rack seem to work OK but the touch screen computer cannot connect to them. A: The surface and rack are connected and functioning normally. This is usual as they do not need the touch screen computer. The touch screen computer is tellin...
< Please see 'Allen "> All 3 elements of an iLive system, the iDR MixRack, the Surface CPU and the Touchscreen computer, can have their network settings reset to the factory default. We recommend that all 3 resets are performed to ensure that all the ...
Please check where you are deriving your signal for the split from. If you are sending "Input Direct Output" signals, no matter where to set the Direct Out source to be (MIXRACK, Mixer Pref, Preferences, Global Direct Output Source etc.), the Trim ...
Q? Where are my scenes and shows stored on an iLive system? A: * SCENE - Both MixRack and Surface/Editor. MixRack Settings stored in MixRack. Strip assignments, local mic pre and local digital source select are stored in Surface/Editor * SHOW - Surf...
Explanation of the System Lock LEDs on the surface and iDR-32, iDR-48 (and iDR-16) mixracks. Looking at a simple iDR-48 hooked up via ACE to a iLive-T112 with no external digital clocks: RACK. MixRack System Lock LED ON indicates that the DSP audio ...
Touchscreen output patch bay: when configuring the Stereo Link status of channels assigned to a Multi Output Card, the button affects the wrong channels. Linking channels 1&2 actually links channels 9&10, and visa-versa. Linking channels 3&4 actuall...
Please use an external 12v power supply to verify that the LEDlamp is working correctly. The power for the LEDlamp comes from the Audio board PCB and is 10V DC It has been known for the screw on the socket to become loose, this screw provides the...
'Dual-Rack' is a special setup mode for two iDR MixRacks. It is to expand the number of input channels of an iLive system from 64 channels to 128, mixing to 32 mixes. Any two MixRacks from the iDR family can be combined in this way, the system can then...
Q: Can I use a 3rd party controller (i.e. AMX/Crestron) with my iLive system? A: Yes, this can be done via MIDI. Since firmware V1.8 iLive supports also third party TCP/IP control via its Network ports. The iLive MIDI protocol and TCP/IP protocol can...
Q: My Touchscreen Computer (SBC) has stopped working - what can I do? A: In the unlikely event of your Touchscreen Computer failing you should in the first instance contact your dealer or local distributor to take the necessary steps to diagnose the...
Trigger a preset recall in an iDR-4 or iDR-8 from an iLive system. PDF instructions: see attached iLive iDR-4 iDR-8 Recall an iDR-4 or iDR-8 preset from an iLive system. Includes PL-7 display of iLive status. keywords: idr4 idr8 pl7 pl-7
NB: THIS ARTICLE IS BASED ON THE AIRPORT EXPRESS 802.11G, NOT THE LATER 802.11N OR SUBSEQUENT AIRPORT REVISIONS. How to configure an Apple Airport Express unit for use with an iLive or GLD system: Please follow the instructions below to configure an A...
THIS IS AN UPDATE OF THE ARTICLE PUBLISHED IN DEC 2009. We ceased support of external touch screens in 2010. The problem is there are multiple Linux distributions in use in different series of iLive, which makes getting a specific 3rd party external t...