Knowledgebase
35dLive
28SQ Series
124Qu Series
78GLD Series
109ZED Series
157Xone Series
33ME System
9GR Series
25MixWizard4 Series
94iDR Series
28GL Series
14XB Series
22GS Series
165iLive
28ICE Series
25PA Series
44PL Series
24Install
Custom Control
5AHM series
61Audio Networking
5Avantis
18Software
11Power Supplies
109Accessories
19General
235Discontinued Products
Knowledgebase : iLive > Operation
NOV 2012
V.1.9 is a major new feature release for iLive Modular and Fixed
Format systems.
[http://www.allen-heath.com/media/iLive-firmware-V1.9-Important-Notes.pdf]
[http://www.allen-heath.com/UK/SoftwareDocuments/iLive%20firmware%20V1.9%20Important%2...
Although the vast majority of USB flash drives will operate flawlessly
with the iLive system there are a small number of USB keys which may
not be recognised.
We suggest that any USB key used with the iLive system is formatted
using the FAT32 [http://en....
You can program the PL-10 in iLive Editor so each button recalls a
scene, each of the scenes will be used to change the PL-Library,
each PL library change which Aux sends the rotaries are controlling.
In the scene manager contents, name however many ...
To transfer individual, or multiple scenes to, and from USB stick:
1. Utility - Configuration tab - USB Scene Transfer button.
2. If there is no USB stick inserted, or if the stick isn't going to
work for whatever reason,
there will be a message...
ILIVE / IDR POWER CONSUMPTION
These are maximum power consumption figures which will be
considerably more than typical power consumption.
iDR s/box
format
AC mains
max power
(W)
64
191
48
163
32
135
16
70
in...
You need to do the network reset descirbed in the PDF.
If the unit will still not connect, you need to connect a laptop with
a static IP address of 192.168.1.10 and 'ping'
Touch screen computer 192.168.1.3
Surface CPU 192.168.1.2
iDR-32 CPU 192.168.1.1
...
Possible noise with Sennheiser EW300 G1 & G2 IEM
Diagram of cable modification to combat noise when using Sennheiser
IEM with iLive
Click Here [1]
Keywords: In Ear Monitoring
Links:
------
[1] http://109.203.103.60/tech/ilive/Sennheiser IEM noise_cable
mod.jpg
Q:
Surface and rack seem to work OK but the touch screen computer cannot
connect to them.
A:
The surface and rack are connected and functioning normally. This is
usual as they do not need the touch screen computer.
The touch screen computer is tellin...
< Please see 'Allen ">
All 3 elements of an iLive system, the iDR MixRack, the Surface CPU
and the Touchscreen computer,
can have their network settings reset to the factory default.
We recommend that all 3 resets are performed to ensure that all the
...
Please check where you are deriving your signal for the split from.
If you are sending "Input Direct Output" signals, no matter where to
set the Direct Out source to be
(MIXRACK, Mixer Pref, Preferences, Global Direct Output Source etc.),
the Trim ...
Q?
Where are my scenes and shows stored on an iLive system? A:
* SCENE - Both MixRack and Surface/Editor. MixRack Settings stored
in MixRack. Strip assignments, local mic pre and local digital source
select are stored in Surface/Editor
* SHOW - Surf...
Explanation of the System Lock LEDs on the surface and iDR-32, iDR-48
(and iDR-16) mixracks.
Looking at a simple iDR-48 hooked up via ACE to a iLive-T112 with no
external digital clocks:
RACK.
MixRack System Lock LED ON indicates that the DSP audio ...
Touchscreen output patch bay: when configuring the Stereo Link status
of channels assigned to a Multi Output Card, the button affects the
wrong channels.
Linking channels 1&2 actually links channels 9&10, and visa-versa.
Linking channels 3&4 actuall...
Please use an external 12v power supply to verify that the LEDlamp is
working correctly.
The power for the LEDlamp comes from the Audio board PCB and is 10V
DC
It has been known for the screw on the socket to become loose, this
screw provides the...
'Dual-Rack' is a special setup mode for two iDR MixRacks.
It is to expand the number of input channels of an iLive system from
64 channels to 128, mixing to 32 mixes.
Any two MixRacks from the iDR family can be combined in this way, the
system can then...
Q:
Can I use a 3rd party controller (i.e. AMX/Crestron) with my iLive
system?
A:
Yes, this can be done via MIDI. Since firmware V1.8 iLive supports
also third party TCP/IP control via its Network ports.
The iLive MIDI protocol and TCP/IP protocol can...
Q:
My Touchscreen Computer (SBC) has stopped working - what can I do?
A:
In the unlikely event of your Touchscreen Computer failing you should
in the first instance contact your dealer or local distributor
to take the necessary steps to diagnose the...
Trigger a preset recall in an iDR-4 or iDR-8 from an iLive system.
PDF instructions: see attached
iLive
iDR-4 iDR-8
Recall an iDR-4 or iDR-8 preset from
an iLive system.
Includes PL-7 display of iLive status.
keywords: idr4 idr8 pl7 pl-7
NB: THIS ARTICLE IS BASED ON THE AIRPORT EXPRESS 802.11G, NOT THE
LATER 802.11N OR SUBSEQUENT AIRPORT REVISIONS.
How to configure an Apple Airport Express unit for use with an iLive
or GLD system:
Please follow the instructions below to configure an A...
THIS IS AN UPDATE OF THE ARTICLE PUBLISHED IN DEC 2009.
We ceased support of external touch screens in 2010.
The problem is there are multiple Linux distributions in use in
different series of iLive, which makes getting a specific 3rd party
external t...
see attachment
see attached file
Help Desk Software by Kayako