RSS Feed
Knowledgebase : iLive Digital Series > Configuration
You need to do the network reset descirbed in the PDF. If the unit will still not connect, you need to connect a laptop with a static IP address of 192.168.1.10 and 'ping' Touch screen computer 192.168.1.3 Surface CPU 192.168.1.2 iDR-32 CPU 192.168.1.1 ...
If you find you can access only channels 1-32 and 33-64 are missing, make sure the Slave iLive Port B ACE Redundant Link option is turned ON. To do this go to the Surface MIXRACK SETUP / Mixer Pref / Port A/B Setup screen, or Editor Setup / Mixer P...
To change the IP address of an iDR Mixrack without a surface you need to use the HTML interface. To do this you need to have your computer and the MixRack connected via an Ethernet cable plugged into a NETWORK socket on the iDR. If the iDR is using the d...
Touchscreen output patch bay: when configuring the Stereo Link status of channels assigned to a Multi Output Card, the button affects the wrong channels. Linking channels 1&2 actually links channels 9&10, and visa-versa. Linking channels 3&4 actuall...
Q: Can I use a 3rd party controller (i.e. AMX/Crestron) with my iLive system? A: Yes, this can be done via MIDI. Since firmware V1.8 iLive supports also third party TCP/IP control via its Network ports. The iLive MIDI protocol and TCP/IP protocol can...
Trigger a preset recall in an iDR-4 or iDR-8 from an iLive system. PDF instructions: see attached iLive iDR-4 iDR-8 Recall an iDR-4 or iDR-8 preset from an iLive system. Includes PL-7 display of iLive status. keywords: idr4 idr8 pl7 pl-7
NB: THIS ARTICLE IS BASED ON THE AIRPORT EXPRESS 802.11G, NOT THE LATER 802.11N OR SUBSEQUENT AIRPORT REVISIONS. How to configure an Apple Airport Express unit for use with an iLive or GLD system: Please follow the instructions below to configure an A...