RSS Feed
Knowledgebase : iLive Digital Series > Connection
Redeeming Dante virtual soundcard Link to PDF instructions [1] keywords: Networking Audinate iLive Links: ------ [1] http://109.203.103.60/tech/ilive/Redeeming%20Dante%20virtual%20soundcard%20kb%20article.pdf
< Please see 'Allen "> All 3 elements of an iLive system, the iDR MixRack, the Surface CPU and the Touchscreen computer, can have their network settings reset to the factory default. We recommend that all 3 resets are performed to ensure that all the ...
If you find you can access only channels 1-32 and 33-64 are missing, make sure the Slave iLive Port B ACE Redundant Link option is turned ON. To do this go to the Surface MIXRACK SETUP / Mixer Pref / Port A/B Setup screen, or Editor Setup / Mixer P...
Explanation of the System Lock LEDs on the surface and iDR-32, iDR-48 (and iDR-16) mixracks. Looking at a simple iDR-48 hooked up via ACE to a iLive-T112 with no external digital clocks: RACK. MixRack System Lock LED ON indicates that the DSP audio ...
'Dual-Rack' is a special setup mode for two iDR MixRacks. It is to expand the number of input channels of an iLive system from 64 channels to 128, mixing to 32 mixes. Any two MixRacks from the iDR family can be combined in this way, the system can then...
* Check the CAT5 cable links the Master MixRack Port B ACE link1 or Link2 to the xDR Port A ACE. * Check the short Network Bridge cable is plugged in at Master Port B. * Check the Master Port B Redundant Link setting is Off using the MIXRACK SETU...
Q: Can I use a 3rd party controller (i.e. AMX/Crestron) with my iLive system? A: Yes, this can be done via MIDI. Since firmware V1.8 iLive supports also third party TCP/IP control via its Network ports. The iLive MIDI protocol and TCP/IP protocol can...
Trigger a preset recall in an iDR-4 or iDR-8 from an iLive system. PDF instructions: see attached iLive iDR-4 iDR-8 Recall an iDR-4 or iDR-8 preset from an iLive system. Includes PL-7 display of iLive status. keywords: idr4 idr8 pl7 pl-7
AES Digital Output Option available for iDR-16 [http://www.allen-heath.com/UK/Products/Pages/ProductDetails.aspx?CatId=iLiveSeries&ProductId=iDR16&SubCatId=MixRacks], iDR-32 [http://www.allen-heath.com/UK/Products/Pages/ProductDetails.aspx?CatId=iLiveSeri...
Layer 2 network switches and media converters can be used, provided they support Fast Ethernet (100Base-TX) connections (ACE and dSNAKE are Ethernet 802.3 IEEE [http://en.wikipedia.org/wiki/IEEE_802.3] Layer 2 compliant) Typical applications include par...
NB: THIS ARTICLE IS BASED ON THE AIRPORT EXPRESS 802.11G, NOT THE LATER 802.11N OR SUBSEQUENT AIRPORT REVISIONS. How to configure an Apple Airport Express unit for use with an iLive or GLD system: Please follow the instructions below to configure an A...
Allen & Heath can provide a range of pre-assembled, approved CAT and fibre cables. Please see here [http://www.allen-heath.com/ahproducts/cat5/] for more information. Recommended Cables for A&H digital mixers Different cables are used with our mixers d...