Although iDR was conceived with the capability of 96kHz operation,
there has not been enough customer demand to justify implementing the
feature.
iDR-4 & iDR-8 do not operate at 96kHz.
1.
Each iDR on a network will send a broadcast once per second.
Each iDR that "hears" this broadcast will reply with a directed UDP
message.
The data payload of the broadcast packet is 12 Bytes, which gives a
total Ethernet packet size of 60 Bytes
(8 f...
Q:
I have been running an iDR4 based system for some time now and am very
pleased with it.
However, I now need to change the laptop I use to run the System
Manager and have a set of archived configurations
that I need to transfer to the new computer, but ...
For instructions on how to connect to an iDR-4 / iDR-8 over the
internet:
Please Click Here [1]
keywords: idr4 idr8
Links:
------
[1]
http://109.203.103.60/tech/iDR/iDR_4%20iDR_8%20connecting%20to%20an%20iDR%20over%20the%20internet%20kb%20arti...
How to set up an offline Telnet session:
1. Start an offline System Manager session (i.e. connect to an offline
iDR-8 or iDR-4).
2. From the Start Menu select Run...
3. In the box type CMD
4. From the DOS prompt type TELNET
5. From the Mic...
We have a PDF detailing iDR-4 & iDR-8 system latency
keywords: iDR4 iDR8
Links:
------
[1]
http://109.203.103.60/tech/iDR/iDR_8%20iDR_4%20latency%20kb%20article.pdf
iDR-Switch, PL, output expander iDR-Out.
Pager.
Use one PL or iDR-Switch to trigger pager in two iDR units.
Please Click Here [1]
keywords: idr4 idr8 idrout idrswitch
Links:
------
[1] http://109.203.103.60/tech/iDR/Paging across two units.pd...
Q:
I am sending a custom MIDI string when recalling a preset.
This is OK but every time the iDR recalls any preset, it sends a MIDI
command that I do not want.
A:
You need to change the default MIDI channel on the iDR-8
In System Manager, go to F...
For the following products:
iDR-4
iDR-IN
iDR-OUT
iDR-SWITCH
iDR D-IN
iDR D-OUT
PL-9
Rack Ears to allow mounting in a standard 19" rack are supplied with
product, but if you need to order more here are the part codes:
PART NO. DESCRIPT...
For more information, please see the Microsoft PowerPoint document,
available for download on the product pages for
keywords - idr4, idr8, pl3, pl4, pl6, pl7, pl8, pl9, pl10, pl11, pl12
Links:
------
[1]
http://www.allen-heath.com/uk/Products/pages/P...
We always advise keeping your original box and packaging,
should you need to move or ship the desk in the future
you will have a box that is designed specifically for this purpose.
To order a replacement please contact your dealer or local distributo...
The proprietary Allen ">(connection made using Cat5 STP)
iDR-4
[2]
iDR D-out [3]
iDR D-in [4]
iDR-Switch [5]
iDR Remote Controllers (PL-Series) [6]
M-MMO [7]
iLive's Digital Multi Output Module [8]
Further information is available ...
Trigger a preset recall in an iDR-4 or iDR-8 from an iLive system.
PDF instructions: see attached
iLive
iDR-4 iDR-8
Recall an iDR-4 or iDR-8 preset from
an iLive system.
Includes PL-7 display of iLive status.
keywords: idr4 idr8 pl7 pl-7
The following products are available with XLR connectors replaced by
Euroblock (Phoenix) connections [1]
and have the suffix -ST (Screw Terminal) to identify them:
iDR-4ST [2]
iDR-8ST [3]
iDR-InST [4]
GR05-ST [5]
(For differences between Phoen...
Q:
Where can I find the RS232 codes for using iDR with AMX and Crestron
controllers?
A:
This information is detailed in the iDR Sys-Net Control Protocol
document which is viewable from the iDR System Manager program group
in the Start Menu.
The MI...
The PL Calculator is a Microsoft Excel spreadsheet that calculates the
viability of a PL network.
For more information see the "Using PL Calculator" pdf file
available to download in the documents section on the product pages
for iDR-4 [http://www.alle...
Q: I have lost the password for my iDR-8, how can I reset?
A: The password for the iDR-4 and iDR-8 can be reset, but it is
something that must be performed by an Allen & Heath Distribution
Partner or one of their appointed service centres.
This is not s...