Knowledgebase : Xone Series > Xone 'D' series > Xone:DB4
We have recommended certain peripheral hardware devices and verified they worked at the time of testing.* * Please take into consideration the fact that these devices are made by 3rd party manufacturers, and the specifications of components can change, ...
In the DB4 Menu set the 'Record Setup' source to 'Mix' the set the 'USB Routing' so 'Send 4' is set to 'Mix' In Traktor set the 'Input Routing' on 'Channel D' to 7/8, in the 'Recording Setup' set the mode to 'External' and the 'External Input' to 'Cha...
Q: Can I use with my Pioneer CDJ2000s using Rekordbox? A: Yes, the XONE:DB4 can be used to playback audio as a standalone player with the Rekordbox software and also by connecting the CDJ2000s or other compatible CD decks with the laptop via a LAN ...
We strongly recommend that you use a dedicated USB flash drive for loading and saving settings, this will need to be a good quality USB key of between 32MB and 4GB and needs to be formatted in a FAT32 format. If updating firmware we recommend saving...
A screw on rack ear kit is available for 19" rack or plinth mounting. To order contact your dealer or your local A">(please note this kit will fit both the Xone:DB4 AND Xone:DB2) keywords - XoneDB4 XoneDB2 XDB4 XDB2 rackmount rackears rack ears r...
This is referred to as 'Deck Start' and turned on / off via the menu. see user guide for details. [1] keywords: XoneDB4 XDB4 Links: ------ [1] http://www.allen-heath.com/uk/Products/Pages/ProductDetails.aspx?CatId=XoneSeries&ProductId=XoneDB4&...
www.xone.co.uk/db4 NOTE: Pairing is only possible if the K2 is running firmware version 2 or above. V2 firmware for the K2 can be downloaded from our website: www.xone.co.uk/k2 keywords: xlink x-link xonedb4 xdb4
Q: Can I use all soundcard outputs on the XONE:DB4 simultaneously, so you can make 4 track recordings of the playback from any connected device independantly for multi-track recording to DAW i.e. Ableton Live? A: Yes. Absolutely ! The XONE:DB4, fea...
If a software application such as Ableton or Traktor isn't recognising the Xone as a MIDI device or isn't receiving MIDI messages from the Xone you will need to check the Mixer is enumerating with the computer as a MIDI device correctly. ON AN APPLE O...
With the mixer off, press and hold the menu button. Power up the mixer and continue holding the menu button for more than 5 seconds (and less than 10 seconds.) Release the menu button. Confirmation that a hard reset has been performed will be sh...
Some of the features of the new firmware are: * Revised gain structure to provide better signal level alignment between analogue and digital Inputs * New effects architecture that allows the tails of reverbs and delays to continue in the mix w...
20.02.13 XONE MAC OSX 10.8 (MOUNTAIN LION) DRIVERS FOR FOLLOWING MIXERS NOW ONLINE: * Xone:1D (2.2.4) * XONE:2D (2.2.3) * XONE:4D (2.2.3) * XONE:DB4 (2.2.3) This driver resolves: Compatibility over USB 3.0 on Mac OSX 10.8 (Mountain Lion) The l...
Care should be taken not to mistakenly insert a USB lead (or any other objects) into the X:Link (RJ45) socket found at the back of a Xone:DB4, Xone:DB2, Xone:23C or Xone:K2, as this can damage the pins and prevent X:link pairing or cause intermittent sig...
By popular demand from the scratch DJ community, there is now a retro-fit Pro X Fade [http://xoneblog.allen-heath.com/?p=1907] option kit for Xone:DB4 [http://www.allen-heath.com/ahproducts/xonedb4/] and Xone:DB2 [http://www.allen-heath.com/ahproducts/xon...
The current version of installed Midi firmware (Code Version) can be found by selecting the "About" screen in the Menu. DB2: Menu > Advanced > About DB4: Menu > About This screen will also display the 24 digit eID number which is unique for your mixer...
The knob caps used for the Xone:DB2 [http://xone.co.uk/db2] and Xone:DB4 [http://xone.co.uk/db4] * Wet/Dry Control are secured with a collet, washer and nut. All the other knob caps used on the mixer are push fit. Care should be taken not to try and rem...
Custom Allen & Heath protective soft bag for the XONE:DB4 (Part No: AP8369) This will also fit the Xone:DB2 To order a replacement please contact your dealer or local distributor [http://www.allen-heath.com/distributors] keywords: xone:db4 xonedb4 xdb4...