GOLD PHONO SHORTING PLUGS connected to any RIAA inputs that are not
connected to (and thus correctly terminated by) record decks /
turntables with magnetic cartridges?
Caution - If shorting plugs are inserted in the soundcard outputs,
this results in ver...
Q: How would I connect and use a Kaoss Pad with the Xone:62?A: It depends on how you're planning on using the Korg Kaoss pad, but for most effects units and processors, you connect the Aux send from the Xone:62 in to the Kaoss pad input, then connect th...
Q.
What do the VCF filters do? And how do you use them?
A.
The Voltage Controlled Filter (VCF) section on the Xone:32 can be
considered a sort of "super EQ".
It can be used as an effect or a mix tool. The electronic circuitry is
analogue (as opposed ...
Q.
How do I go about hooking up external effects to the Xone:62?
A.
You send from the desired channels via the aux sends - out of the
impedance balanced TRS jack outputs to your FX unit which could be
Mono or Stereo.
The FX unit outputs can then be bro...
Q:
Why is it that the Line level input on the Mic 1 and 2 sends still
goes to a record out. I thought the record was a cleanfeed and did not
include the Microphone channels?
A:
On the Xone:62 and Xone:92 models, the mic feed to the booth is a
cleanf...
The mic inputs are intentionally not routed to the Record output
inside the mixer - it's nothing you are doing wrong!
The reason is that the Record output is taken from the same audio
feed as the Booth output, and in a club environment
it is not de...
Q:
I would like to convert my mixer to the new Storm Grey colour scheme,
is this possible?
A:
Yes, it is possible to upgrade the following XONE mixers from the
original silver / grey colour scheme to the new storm grey colour
scheme,
this involves ...
If your Xone Mixer has a Penny + Giles crossfader, all use the same
model:
AI4222 P">Note The crossfader knob is sold separately:
AJ5320 P">
There are some spare parts for the crossfader that can also be
purchased individually:
AI5291 FADER SPA...
Q:
Xone:62 - Can I convert my phono inputs into line inputs?
A:
Yes, this is possible, but not a user option, but it is not as
straight forward as the Xone:92 which can be done by changing jumper
positions.
For the Xone:62 you will need to send you...
The original Xone:62 and Xone:464 mixers used a crossfader made by
Alps, these are no longer available
and are replaced by a Penny + Giles crossfader (A">If replacing an
Alps crossfader for a P+G, you will need to purchase a new face plate
as the fixi...
The master level on the original MK1 Xone:62 had a 100mm linear fader,
In later models, this was changed to a rotary pot.
If you need a replacement linear fader, part number: AI8118,
please contact your local A&H distributor to order
keywords X62 Xon...
Two rack kits for the Xone:62 which allow it to be used with 9.5" or
19" racks.
9.5" (NARROW) rack ears to enable the mixer to be dropped into a
surface / custom case / furniture
19" (WIDE ) rack brackets to extend the mounting to standard 19" rack
moun...