Unfortunately there is no 'off the shelf' box available for the
purpose of wall mounting.
See the \"PL Plinth Cut Out Templates.pdf\" here: [1]
The PL-10 and the PL-6 share the same box,
(PL-10 has rotary faders / PL-6 linear)
Unfortunately when fix...
We always advise keeping your original box and packaging,
should you need to move or ship the desk in the future
you will have a box that is designed specifically for this purpose.
To order a replacement please contact your dealer or local distributo...
END OF CHAIN TERMINATION.
As with any RS485 system, the last PL device needs to have a
terminating resistor fitted to its output port.
Early version PL-3 modules are shipped with a 100 ohm resistor already
fitted.
Leave this fitted only if the unit i...
As with any RS-485 [1] system, the last PL device needs to have a
terminating resistor fitted to its output port.
Some early versions of PL modules (eg. PL-3) are shipped with a 100
ohm resistor already fitted.
Leave this fitted only if the unit is...
PL-3, PL-4, PL-12
Brushed Aluminium Wallplate for use with PL-3, PL-4, PL-12
and the discontinued PL-1 and PL-2
part no. - country
AA5029 - UK *
AA5030 - US
AA5250 - EU
PL-8
Brushed Aluminium Wallplate
part no. - country
AA5275 - EU
AA5276 - U...