RSS Feed
Knowledgebase : Xone Series > Xone:92
GOLD PHONO SHORTING PLUGS connected to any RIAA inputs that are not connected to (and thus correctly terminated by) record decks / turntables with magnetic cartridges? Caution - If shorting plugs are inserted in the soundcard outputs, this results in ver...
Q. What do the VCF filters do? And how do you use them? A. The Voltage Controlled Filter (VCF) section on the Xone:32 can be considered a sort of "super EQ". It can be used as an effect or a mix tool. The electronic circuitry is analogue (as opposed ...
Q: Why is it that the Line level input on the Mic 1 and 2 sends still goes to a record out. I thought the record was a cleanfeed and did not include the Microphone channels? A: On the Xone:62 and Xone:92 models, the mic feed to the booth is a cleanf...
The mic inputs are intentionally not routed to the Record output inside the mixer - it's nothing you are doing wrong! The reason is that the Record output is taken from the same audio feed as the Booth output, and in a club environment it is not de...
Q: I would like to convert my mixer to the new Storm Grey colour scheme, is this possible? A: Yes, it is possible to upgrade the following XONE mixers from the original silver / grey colour scheme to the new storm grey colour scheme, this involves ...
Rack ears are supplied with the Xone:92 [1], see User Guide for details Should you need more, please order through your dealer or local Allen ">part code > description X:92-RK19SG > RACK EAR ASSY XONE:92 19" (STORM GREY) XONE:92-RK19 > RACK EAR ASS...
Q: Xone:92 - Can I convert my phono inputs into line inputs? A: You can convert any of the RIAA phono pre-amplifier inputs to line level by removing four jumper sleeves from the channel PCB assembly that you want to convert. (*other options avail...
The knob caps for the rotary faders are not push fit but secured with a collet, washer and nut. They are the same parts as used for the Wet/Dry Control knobs on the Xone:DB2 and Xone:DB4 If you need to remove, tighten or adjust, please see this related k...
It is possible to change the curve response of the linear channel faders on the XONE:92 to give a more gradual response. This requires a modification to the connector on the fader PCB (AG5610), For more information on this please contact your local All...
The knob caps used for the Xone:DB2 [http://xone.co.uk/db2] and Xone:DB4 [http://xone.co.uk/db4] * Wet/Dry Control are secured with a collet, washer and nut. All the other knob caps used on the mixer are push fit. Care should be taken not to try and rem...
Replacement rotary faders (part no. 003-145) For more information on availability and price please contact your dealer or local A&H distributor [http://www.allen-heath.com/UK/Company/Pages/Distributors.aspx] These pots are also used on the Xone:S2 ...