RSS Feed
Knowledgebase : PL Series > PL-10
You can program the PL-10 in iLive Editor so each button recalls a scene, each of the scenes will be used to change the PL-Library, each PL library change which Aux sends the rotaries are controlling. In the scene manager contents, name however many ...
Unfortunately there is no 'off the shelf' box available for the purpose of wall mounting. See the \"PL Plinth Cut Out Templates.pdf\" here: [1] The PL-10 and the PL-6 share the same box, (PL-10 has rotary faders / PL-6 linear) Unfortunately when fix...
We always advise keeping your original box and packaging, should you need to move or ship the desk in the future you will have a box that is designed specifically for this purpose. To order a replacement please contact your dealer or local distributo...
END OF CHAIN TERMINATION. As with any RS485 system, the last PL device needs to have a terminating resistor fitted to its output port. Early version PL-3 modules are shipped with a 100 ohm resistor already fitted. Leave this fitted only if the unit i...
As with any RS-485 [1] system, the last PL device needs to have a terminating resistor fitted to its output port. Some early versions of PL modules (eg. PL-3) are shipped with a 100 ohm resistor already fitted. Leave this fitted only if the unit is...
PL-3, PL-4, PL-12 Brushed Aluminium Wallplate for use with PL-3, PL-4, PL-12 and the discontinued PL-1 and PL-2 part no. - country AA5029 - UK * AA5030 - US AA5250 - EU PL-8 Brushed Aluminium Wallplate part no. - country AA5275 - EU AA5276 - U...