Knowledgebase : Discontinued Products > ML Series > ML3000
ML3000 channel mute LEDs are grounded by the Pan pot. If the channel mute LEDs are malfunctioning, remove the Pan pot knob and pot nut. Remove some paint from the front panel beneath the pot nut. Replace the pot nut so that it makes contact with th...
It is possible to modify the direct out from post-fade to pre-fade by adjusting jumper settings, as illustrated in the Block Diagrams in the User Guides. (jumpers J4/J5/J6) As these are discontinued models, the Service Manual and schematics should b...
Being 'firmware' rather than computer software, there weren't ever any officially published release notes for ML software version V1.40. The main functional difference is the extra MIDI functionality from the input PAFL switches, but there was also a ...
The RPS11 [1] power supply - was available with a choice of connections, depending on which desk it is powering. RPS11 Cable part no. 002-223 (10 Pin Male to 10 PIN Female output) RPS11-3C Cable part no. 002-225 (10 Pin Male to 5 PI...
Available to order via your dealer or local Allen ">keywords: accessories accessory soft dustcover Links: ------ [1] http://www.allen-heath.com/distributors
Many Allen & Heath products can have their busses linked so as to expand input/output capability. We call this Sys-Link(tm) and it requires the purchase and fitting of special PCBs to each mixer. The signals are presented on D connectors on the rear of...
The Master and Slave both require their own distinct Sys-Link(tm) option card. - Please see attached chart If you have any questions please contact your dealer or local Allen & Heath distributor [http://www.allen-heath.com/distributors] keywords: SysLink...
Modification to patch talkback to Aux1-4 PDF instructions attached
RPSD Combiner for two 5 pin MPS / RPS PSUs RPSD2 Combiner and conditioner for two RPS11 10 pin PSUs This is a discontinued product, the User Guide is available in the Old Products section of our website [http://www.allen-heath.com/ahproducts/rpsd-rpsd2...
An LED alternative for replacing the incandescent bulbs in the ML and GL series mixer meterbridges. This can be fitted to the individual meters in the mixer as an alternative to fitting the Meter bulb * The cost of the LED option is also cheaper than ...