If running iLive Editor 1.72 or earlier, PL devices can be programmed
in Offline mode,
if running Editor 1.80 or above the PL devices must be connected to a
MixRack in order for the device to be programmed,
either using iLive Editor in Online mode o...
iDR-Switch, PL, output expander iDR-Out.
Pager.
Use one PL or iDR-Switch to trigger pager in two iDR units.
Please Click Here [1]
keywords: idr4 idr8 idrout idrswitch
Links:
------
[1] http://109.203.103.60/tech/iDR/Paging across two units.pd...
For more information, please see the Microsoft PowerPoint document,
available for download on the product pages for
keywords - idr4, idr8, pl3, pl4, pl6, pl7, pl8, pl9, pl10, pl11, pl12
Links:
------
[1]
http://www.allen-heath.com/uk/Products/pages/P...
Trigger a preset recall in an iDR-4 or iDR-8 from an iLive system.
PDF instructions: see attached
iLive
iDR-4 iDR-8
Recall an iDR-4 or iDR-8 preset from
an iLive system.
Includes PL-7 display of iLive status.
keywords: idr4 idr8 pl7 pl-7
The PL Calculator is a Microsoft Excel spreadsheet that calculates the
viability of a PL network.
For more information see the "Using PL Calculator" pdf file
available to download in the documents section on the product pages
for iDR-4 [http://www.alle...
END OF CHAIN TERMINATION.
As with any RS485 system, the last PL device needs to have a
terminating resistor fitted to its output port.
Early version PL-3 modules are shipped with a 100 ohm resistor already
fitted.
Leave this fitted only if the unit i...