RSS Feed
Knowledgebase : Qu Series > Qu-Pac
UNDERSTANDING QU-DRIVE and USB Devices Qu-Drive is a facility to record and playback stereo (2-track) and multitrack (18-track) audio. The recording format is WAV 48kHz 24-bit. Qu-Drive audio recording and multitrack playback require the USB storage ...
This article applies to Qu and ZEDi series mixers only. System requirements and instructions for the Windows USB Audio Drivers are specified in the driver Help Manuals. This is available from the driver section of the product Software pages. For USB a...
The Qu range of Allen & Heath mixers do not have dedicated send and returns for external hardware. As a workaround you can do the following: * Send audio from your DAW to Qu's input channel/s. * Send audio from the input channel above to a Mix Out...
Known Issues - Qu-Drive: An unformatted USB key plugged into Qu-Drive is not always recognised by the mixer. You may need to first format the USB key on a PC or Mac (FAT 32), then try to format it again on the Qu mixer. keywords: Qu-16 Qu-24 Qu-32 Qu...
Q.  Are there any Android Apps available for Qu series mixers?   A.  There is now an Android version of Qu-You available: https://play.google.com/store/apps/details?id=com.allenheath.qumon [https://play.google.com/store/apps/details?id=com.allenheat...
THE FOLLOWING PROCEDURE SHOULD ONLY BE ATTEMPTED ON A WINDOWS BASED PC Qu-Drive recordings can appear corrupt if the USB media is removed too early or the system loses power. In this situation you can typically find yourself with eighteen .WAV files t...
Sending FX to the Mix outputs uses the exact same method as sending input channels to the Mix outputs. Press the blue mix key for the Mix you want to send the FX to (Mix 1, Mix 2, Mix 3 etc). In a Mix you have access to the same channels as the main L...
ROUTING AUDIO FROM QU TO THE DAW The USB/Qu-Drive audio upstream is always available and doesn't need to be configured to enable recording via Qu-Drive or the DAW. The routing for all USB/Qu-Drive audio can be found under: SETUP > I/O PATCH > USB AUDI...
Be default your Qu mixer is set to tap the signal for Qu-Drive and USB Audio from the insert sends, directly after the preamp. There may be scenarios where you will want to include the channel processing and inserts in your USB audio. You can change thi...
Rack Ears are provided with the Qu-Pac Please see the Getting Started Guide - available on the product page [http://www.allen-heath.com/ahproducts/qu-pac] - documents section p.4 Packed Contents 19" Rack Ears and screws AA9848-L and AA9848-R 4x AB03...