RSS Feed
Knowledgebase : Discontinued Products > GS3 / GS3V
Q: How do I do a Hard Reset on the GS3 mixer? A: This is stated in the GS3 User Guide, on page B7-3. With the mixer powered off, press and hold the CLEAR key while powering up the mixer. Hold it for a few seconds then release the key. Press the CLE...
Q: My GS3V is doing strange things in the Mute Processor. Can I do a Hard Reset? A: Yes, try a hard reset of the mixer which will clear the patches, mix data and general console settings stored in the battery-backed memory, and restores the mixer to...
Q: I've just bought a GS3 Mixer, hooked it up to my Mackie HDR-24, when listening back to tracks can't get the fader section (channel section) to work, trying to adjust track levels with faders won't work but I can adjust the levels with the monitor secti...
The RPS11 [1] power supply - was available with a choice of connections, depending on which desk it is powering. RPS11 Cable part no. 002-223 (10 Pin Male to 10 PIN Female output) RPS11-3C Cable part no. 002-225 (10 Pin Male to 5 PI...
RPSD Combiner for two 5 pin MPS / RPS PSUs RPSD2 Combiner and conditioner for two RPS11 10 pin PSUs This is a discontinued product, the User Guide is available in the Old Products section of our website [http://www.allen-heath.com/ahproducts/rpsd-rpsd2...
An LED alternative for replacing the incandescent bulbs in the ML and GL series mixer meterbridges. This can be fitted to the individual meters in the mixer as an alternative to fitting the Meter bulb * The cost of the LED option is also cheaper than ...