RSS Feed
Knowledgebase : XB Series > XB-14²
The rack mounting kit part number is: ZED1402-RK19, as used on the Zed-14, suitable for both XB-14 [1] (MK1) and XB-14² [2] (MK2) (see User Guide for details) Please order through your dealer or local Allen ">keywords rack mount Rackears Rack ears ...
We always advise keeping your original box and packaging, should you need to move or ship the desk in the future you will have a box that is designed specifically for this purpose. To order a replacement please contact your dealer or local A"> Part N...
The TELCO inputs allow you to connect a telephone, via a telephone audio interface equipped with XLR outputs to the XB-14 [1]. keywords: XB14 xb14² Links: ------ [1] http://www.allen-heath.com/uk/Products/pages/ProductDetails.aspx?catId=&Produ...
Q: As stated in the manual, Mic channel 1 is linked to the Telco channel's Talk switch as default. I understand that changing this factory setup requires opening the case and locating the appropriate link connection. That will be no problem. However...
The start/stop logic outs are 50mS pulses pulled low to a common ground through an open collector transistor (which means that the outputs can be pulled up externally by the connected equipment circuit). keywords: XB14 xb14²
The XB-14 [1] Connector Cover (part number XB-14-COVER) is an optional extra designed to keep wires out of sight. This is a simple user fit, attached is the fitting note showing the cover fitted. ALSO SUITABLE FOR THE XB-14 Please order from yo...
19" Rack kit for the ZED-14 - Order part number: ZED1402-RK19 (as used on the XB-14 to XB-14² too) Please order through your dealer or local Allen & Heath distributor [http://www.allen-heath.com/distributors] keywords Rackears Rack ears furniture ze...
Q: WHAT ARE THE DIFFERENCES BETWEEN XB-142 AND XB-14? A: The main improvements are: * Audition button with LED on every channel * Audition bus master rotary control * Mix minus audition feeds on telco channels * Audition button added to USB se...
To configure your Allen & Heath desk for use with an external FX processor carry out the following steps. * Connect an Aux* output to the mono or left input of your external FX processor. * Connect the stereo LR returns from your FX processor to a s...