RSS Feed
Knowledgebase : Accessories > Cables
The RPS11 [1] power supply - was available with a choice of connections, depending on which desk it is powering. RPS11 Cable part no. 002-223 (10 Pin Male to 10 PIN Female output) RPS11-3C Cable part no. 002-225 (10 Pin Male to 5 PI...
ILIVE ENGINEERS TOOL KIT SUPPLIED WITH ILIVE-80/ILIVE-112/ILIVE-144/ILIVE-176 part no. description 003-861 BAG ACCESS'S POUCH ILIVE contents: AA6869 TOOL IDR-10 MODULE EXTRACTOR AH8823 CABLE CAT5 STP 2M XLR-XLR AT7278 TORX FOLD UP SET AN7279 BAG ...
The Direct outputs are ideal sources for the ICE-16D. Balanced or unbalanced signals can be handled by the input circuit of the ICE-16D. Ready made D-Sub cable assemblies are available from audio equipment suppliers and electronic component retailers. ...
The Master and Slave both require their own distinct Sys-Link(tm) option card. - Please see attached chart If you have any questions please contact your dealer or local Allen & Heath distributor [http://www.allen-heath.com/distributors] keywords: SysLink...
Third-party locking IEC mains cables can be used for securing the power source to our products. Those that work with universal inlets are suitable, manufacturers include IEC Lock [http://www.ieclock.co.uk/index.html] and Schaffner [http://www.google.com/...
A Mini DIN 8 pin lead* of not more than 2 metres in length is needed for each unit to be synchronised to the master unit. Available to order from your dealer or local Allen & Heath distributor part code - description AH9556 - CABLE DIN MINI8P-MINI8P 1...
A&H part number AH6443 USB 2.0 Cable Type A Male to Type B Male Please order via your dealer or local A&H distributor https://en.wikipedia.org/wiki/USB [https://en.wikipedia.org/wiki/USB] The standard-A USB connection - found on USB memory stick / f...
A 2m USB A - USB B lead is provided with the unit. Should you need to order a replacement, please contact your dealer or local A&H distributor Part Number: AH8752 (CABLE USB A-B 2M) keywords: Xone:23C Xone23C X23C
If you purchase from your local dealer or distributor, the correct mains power lead will be supplied for the local electricity supply. Should you move to to another country, an alternative lead might be required: part no. - description / type AH0205 - ...
Allen & Heath can provide a range of pre-assembled, approved CAT and fibre cables. Please see here [http://www.allen-heath.com/ahproducts/cat5/] for more information. Recommended Cables for A&H digital mixers Different cables are used with our mixers d...
DC POWER CABLE 2.8m male>female 10-pin. Part number 003-576. Connects the iPS10 [1] power rails to the iLive Surface or iDR0 MiniRack backup supply input. Available to order from your dealer or local distributor [2] keywords IPS-10 Links: -...
The 7-way Male - Female PSU lead to connect the MPS6 PSU to the V6 or to daisy-chain the V6 to any of its accessories (crossfader / isolator) were produced in 3 lengths 3m length: A&H Part No. 002-583 [CABLE ASSY DC 7PIN M-F 3M(PSU-MIXER)] - used for...