The RPS11 [1] power supply - was available with a choice of
connections, depending on which desk it is powering.
RPS11 Cable
part no. 002-223
(10 Pin Male to 10 PIN Female output)
RPS11-3C Cable
part no. 002-225
(10 Pin Male to 5 PI...
ILIVE ENGINEERS TOOL KIT SUPPLIED WITH
ILIVE-80/ILIVE-112/ILIVE-144/ILIVE-176
part no. description
003-861 BAG ACCESS'S POUCH ILIVE
contents:
AA6869 TOOL IDR-10 MODULE EXTRACTOR
AH8823 CABLE CAT5 STP 2M XLR-XLR
AT7278 TORX FOLD UP SET
AN7279 BAG ...
The Direct outputs are ideal sources for the ICE-16D.
Balanced or unbalanced signals can be handled by the input circuit of
the ICE-16D.
Ready made D-Sub cable assemblies are available from audio equipment
suppliers and electronic component retailers.
...
The Master and Slave both require their own distinct Sys-Link(tm)
option card. - Please see attached chart
If you have any questions please contact your dealer or local Allen &
Heath distributor [http://www.allen-heath.com/distributors]
keywords: SysLink...
Third-party locking IEC mains cables can be used for securing the
power source to our products.
Those that work with universal inlets are suitable, manufacturers
include IEC Lock [http://www.ieclock.co.uk/index.html] and Schaffner
[http://www.google.com/...
A Mini DIN 8 pin lead* of not more than 2 metres in length
is needed for each unit to be synchronised to the master unit.
Available to order from your dealer or local Allen & Heath distributor
part code - description
AH9556 - CABLE DIN MINI8P-MINI8P 1...
A&H part number AH6443
USB 2.0 Cable Type A Male to Type B Male
Please order via your dealer or local A&H distributor
https://en.wikipedia.org/wiki/USB [https://en.wikipedia.org/wiki/USB]
The standard-A USB connection - found on USB memory stick / f...
A 2m USB A - USB B lead is provided with the unit.
Should you need to order a replacement, please contact your dealer or
local A&H distributor
Part Number: AH8752 (CABLE USB A-B 2M)
keywords: Xone:23C Xone23C X23C
If you purchase from your local dealer or distributor, the correct
mains power lead will be supplied for the local electricity supply.
Should you move to to another country, an alternative lead might be
required:
part no. - description / type
AH0205 - ...
Allen & Heath can provide a range of pre-assembled, approved CAT and
fibre cables. Please see here
[http://www.allen-heath.com/ahproducts/cat5/] for more information.
Recommended Cables for A&H digital mixers
Different cables are used with our mixers de...
DC POWER CABLE 2.8m male>female 10-pin.
Part number 003-576.
Connects the iPS10 [1] power rails to the iLive Surface or iDR0
MiniRack backup supply input.
Available to order from your dealer or local distributor [2]
keywords IPS-10
Links:
-...
The 7-way Male - Female PSU lead to connect the MPS6 PSU to the V6
or to daisy-chain the V6 to any of its accessories (crossfader /
isolator)
were produced in 3 lengths
3m length:
A&H Part No. 002-583 [CABLE ASSY DC 7PIN M-F 3M(PSU-MIXER)]
- used for...
