These are detailed in the User Guides, available to download on the
relevant product page [1].
Options are of 2 types:
Jumper Options - move jumpers to desired position
Solder Options - requires use of soldering iron and sharp knife. *****
***** I...
ALLEN ">allows the swift reconfiguration of the mixer from desktop,
rack or flightcase mounting due to a hinged connector panel
As used on the MixWizard4 Series [1] (and all previous MixWizard
models [2]) and the Xone:464 [3]
For more information p...
Aux outputs are impedance balanced as standard,
but if required can be modified to be electronically balanced
with the addition of additional components.
AE0302 IC BAL DRIVER SSM2142P
AE5725 IC BAL DRIVER DRV134 For more information please contact ...
We recommend the use of the Allen & Heath LEDLamp with built-in
dimmer.
This 18" flexible gooseneck lamp connects via the 4-pin XLR Lamp
socket at the back of the MixWizard4
To order, please contact your A">LEDLamp is available in two versions:
LE...
To configure your Allen & Heath desk for use with an external FX
processor carry out the following steps.
* Connect an Aux* output to the mono or left input of your external
FX processor.
* Connect the stereo LR returns from your FX processor to a s...
Q: The MixWizard 4 Mac Driver V3.2.2 (July 2014) says OSX 10.11 El
Capitan is supported, but the installer won't run.
A: There is a known issue with the WIZARD 4_3.2.2 installer package
and it does not open normally in El Capitan by double clicking or
u...