RSS Feed
Knowledgebase : Audio Networking
(9)ACE
(11)Waves
(12)Dante
(7)MADI
(7)MMO

Q: We have two Allen ">A: The EtherSound website has a list of approved & recommended switchers: http://www.ethersound.com/technology/compatibility.php?o=switches [1] We also have experience of customers who used these switches (+ Fibre) with no pr...
If you find you can access only channels 1-32 and 33-64 are missing, make sure the Slave iLive Port B ACE Redundant Link option is turned ON. To do this go to the Surface MIXRACK SETUP / Mixer Pref / Port A/B Setup screen, or Editor Setup / Mixer P...
Explanation of the System Lock LEDs on the surface and iDR-32, iDR-48 (and iDR-16) mixracks. Looking at a simple iDR-48 hooked up via ACE to a iLive-T112 with no external digital clocks: RACK. MixRack System Lock LED ON indicates that the DSP audio ...
Q: With iLive modular, and V1.61 firmware, when connecting two MixRacks together for Dual-MixRack function, do the Network Bridge jumpers need to be connected with ACE & Network in each of the MixRacks? Would seem that ACE would need the control func...
'Dual-Rack' is a special setup mode for two iDR MixRacks. It is to expand the number of input channels of an iLive system from 64 channels to 128, mixing to 32 mixes. Any two MixRacks from the iDR family can be combined in this way, the system can then...
The MixRack to Surface link in iLive is always 64 channels bi-directional capability. For this connection you can use currently : A) ES (EtherSound) [1] B) ACE [2] C) MADI [3] The iLive system 'reserves' channels 1-32 in this audio bridge for inpu...
This setup has been tested by Customer Services. 2x TP-Link MC-100CM Fast Ethernet Media Converter (SC, Multi-mode) 2x Videk 3182-1 adapter cable (SC to LC, duplex, multimode) 2x Neutrik NO2-4FDW (OpticalCON DUO chassis connector with LC-duplex socket...
Q: What type of cable do I use with M-MADI and how far can it run? A: Non-optical MADI systems use 75ohm Coaxial (video) cable terminated with BNC connectors. We tested M-MADI with typical industry cable (Belden 1505A) with 'Amphenol' BNC connectors. W...
Dante Via is an Audinate software for routing computer-based audio into Dante networks. The following are some application examples relating to Allen & Heath digital mixers. INTEGRATING A QU MIXER INTO A DANTE NETWORK The Qu USB audio interface is r...