RSS Feed
Knowledgebase : ME System > ME-U
Adds support for the ME-U Personal Mixer hub [1]. Note: The ME-1 [2] mixer must run firmware version V1.10 or higher to work with the ME-U hub. http://www.allen-heath.com/software [3] 27th Sept 2013 keywords ME1 MEU V.1.10 File download: A...
We always advise keeping your original box and packaging, should you need to move or ship the desk in the future you will have a box that is designed specifically for this purpose. To order a replacement please contact your dealer or local distributo...
Q: Can I connect to other audio protocols? A: Yes. * Direct connection to GLD dSNAKE [1] * Direct connection to iLive ACE [2] * Direct connection to Aviom® A-Net 16 * Connect to other networks via ME-U hub [3]: 48kHz Dante [4] MADI [...
Q: Our customer uses 2 iLive systems with 2 MixRacks and 2 consoles in FoH+Monitor mode. He is going to use ME-1 system [1]. So is it possible to connect in this system ME-1? If yes - then how? A: If he is using 2 iLives in FOHMONS then probably he ...
Version 1.01 - Maintenance release. October 2013 < File download: AllenHeathMEU_V1.01-Rev12139.zip > [1] Issues fixed: ID_87: ME-1 even key settings could be reset after the ME-U rebooted following an IP address change using its setup applicatio...
Update - An error has been detected with this maintenance release that did not fully fix the issue with ME-U. Maintenance Release V.1.94 will be available ASAP (20.01.14) V1.93 is a maintenance release of iLive firmware and Editor software. Vers...
If you are having problems accessing the ME-U Setup Application GUI, you might have an early production model (first 20 units) THE FIRST BATCH OF UNITS MANUFACTURED WERE GIVEN AN IP ADDRESS = 192.168.1.100  which is not the same as that listed in the Us...