RSS Feed
Knowledgebase : ME System > ME-1
Available to download on the or at www.allen-heath.com/Software [1] For further information please see the User Guide (issue 2 p.9) Aug 2013 keywords me1 configuration presets reset restore Links: ------ [1] http://www.allen-heath.com/Software...
Adds support for the ME-U Personal Mixer hub [1]. Note: The ME-1 [2] mixer must run firmware version V1.10 or higher to work with the ME-U hub. http://www.allen-heath.com/software [3] 27th Sept 2013 keywords ME1 MEU V.1.10 File download: A...
We have recommended certain peripheral hardware devices and verified they worked at the time of testing.* * Please take into consideration the fact that these devices are made by 3rd party manufacturers, and the specifications of components can change, ...
Q: What are the specifications of ME-1? A: Stereo Out - Stereo ¼" and 3.5mm jacks for: Headphones >16 Ω , power 300+300mW into 100 Ω load, or line out max +21dBu Mono Out - Balanced TRS jack, nom 0dBu, max +18dBu Aux Input - Stereo...
Q: How is ME-1 powered? A: ME-1 ships with a wall-wart. ME-1 can be powered via the Link In Cat5 cable when connected to a PoE (Power over Ethernet) switch or the ME-U hub. keywords ME1 walwart wallwart wall wart psu
We always advise keeping your original box and packaging, should you need to move or ship the desk in the future you will have a box that is designed specifically for this purpose. To order a replacement please contact your dealer or local distributo...
Q: Can I use a standard Ethernet switch to connect ME-1? A: For parallel connection of multiple ME-1 [1] mixers each with their own cable you can use a standard off-the-shelf Ethernet switch. An unmanaged 100 Mbit/s (Fast Ethernet) or Gigabit swi...
Q: Does it come with the headphone hanger? A: Yes. A hook that presses into the underside of the mixer to hang headphones or ear pieces while mounted to a microphone stand.
You can 'trick' the iDR by preparing a Show offline with Editor. Start with an iDR0 or iDR10 and a modular Surface equipped with output modules. This way you can patch signals to Port A 33-62, and to the Surface outputs which would effectively go o...
Q: Can I connect to other audio protocols? A: Yes. * Direct connection to GLD dSNAKE [1] * Direct connection to iLive ACE [2] * Direct connection to Aviom® A-Net 16 * Connect to other networks via ME-U hub [3]: 48kHz Dante [4] MADI [...
August 2013. V1.01 Firrmware available to download on the ME-1 product page [1] or at www.allen-heath.com/Software [2] Improvements:  Improved support for Aviom® Pro16® system  Aux In headroom increased  Fixes several other minor issues New f...
Q: Our customer uses 2 iLive systems with 2 MixRacks and 2 consoles in FoH+Monitor mode. He is going to use ME-1 system [1]. So is it possible to connect in this system ME-1? If yes - then how? A: If he is using 2 iLives in FOHMONS then probably he ...
Version 1.01 - Maintenance release. October 2013 < File download: AllenHeathMEU_V1.01-Rev12139.zip > [1] Issues fixed: ID_87: ME-1 even key settings could be reset after the ME-U rebooted following an IP address change using its setup applicatio...
To order a new 12V switch-mode power supply, please contact your local dealer or A&H local distributor part number AM6905 keywords - xone22 xone2D xone:2D Xone:DX XoneDX X22 X2D DXD PSU wallwart ME1 universal switchmode SMPS
If you have misplaced your headphone holder or microphone stand side mounting bracket for your ME-1, you can order replacements from your dealer or local Allen & Heath distributor [http://www.allen-heath.com/UK/Company/Pages/Distributors.aspx] part no. ...
For parallel connection of multiple ME-1 mixers, a Layer 2 network switch can be used, provided it supports Fast Ethernet (100Base-TX) connections. Layer 3 & 4 protocols including Spanning Tree, Tagged Egress Packets, and Broadcast Storm Protection can ...
Q: Can I get ambient _ stage sound mixed into my IEM? A: Yes. ME-1 have built-in mics tp pick up stage sound and add it to the mix
Q: Can I get new firmware? A: Yes. Firmware is updated when new features are added or improvements made. Check the Allen & Heath web site for the latest version available. This can be downloaded, transferred to USB key and then loaded into the ME...
Q: Does it come with cable? What cable can I use? A: ME-1 does not ship with cable. Use STP (shielded twisted pair) CAT5e or higher cables. Those with both foil andbraided screens provide shielding from interference and are generally more rugged....
Q: Does it come with mounting brackets? A: The mixer has a built-in 3/8" thread to mount it to the top of a microphone stand. A bracket is also provided for mounting to the side of a microphone stand.
Q: How do I copy settings to other ME-1 units? A: By USB key.
Q: How many ME-1 can I link together? A: Any number of ME-1 mixers can be positioned on stage or anywhere personal control is needed. ME-1 receives multiple channels of audio via a Cat5 cable link from the main console and mixes it to its own ...
Q: How many signals / audio channels can I access and mix? A: Up to 40 (16 when connected to Aviom)
Please see details in the User Guide available to download 9.2 TO RESET THE ME-1 To perform a hard reset: Hold down the Shift + Recall + Master keys and power up the mixer. Release the keys ...