Controlling iDR with Editor over WAN
Setup with 2 locations, each with a ADSL connection.
In each location assuming an ADSL modem with integrated firewall and
NAT enabled router.
Assume a laptop running editor in one location and a Mixrack in ...
Q.
When i save a Scene (offline or editor+mixrack) - the Editor dont
saves the strip layout to the scene.
Also if i add everything via the "edit" button and i restart the
editor (offline or just editor+idr) the strip layout is gone again and
cannot ...
You can program the PL-10 in iLive Editor so each button recalls a
scene, each of the scenes will be used to change the PL-Library,
each PL library change which Aux sends the rotaries are controlling.
In the scene manager contents, name however many ...
If you find you can access only channels 1-32 and 33-64 are missing,
make sure the Slave iLive Port B ACE Redundant Link option is turned
ON.
To do this go to the Surface MIXRACK SETUP / Mixer Pref / Port A/B
Setup screen,
or Editor Setup / Mixer P...
Q. After getting on swimmingly for many weeks, I've begun receiving a
popup error upon launching the iLive Editor v1.53. See attachment.
"Please open the application with the script provided, or with the
following command line arguments: java -Xms256m...
If running iLive Editor 1.72 or earlier, PL devices can be programmed
in Offline mode,
if running Editor 1.80 or above the PL devices must be connected to a
MixRack in order for the device to be programmed,
either using iLive Editor in Online mode o...
There is a conflict between an element of the Vista interface called
Aero Glass and Java version 1.6.u10 which causes Java applications,
such as iLive Editor, to run slowly. Two solutions:
* Download and install a different Java version (1.6.u5 _OR_...
Editor running with 64bit OS
Q. After getting on swimmingly for many weeks, I've begun receiving a
popup error upon launching the iLive Editor v1.53. See attachment.
"Please open the application with the script provided, or with the
following comma...
How do I set a static IP address for my PC or Mac?
If you are using a PC: 1: Go to - Control Panel - Network Connections
2: Right click on your Ethernet adapter connected to the Ethernet port
on the PC - Click on 'Properties'
3: Scroll down the connectio...
Symptoms:
* Editor freezes and 'system busy' messages appear on the laptop
screen.
* The meters on the Surface freeze briefly then catch up.
Make sure the Multicast option is ON in the MixPad tab of the iPad
SETTINGS menu.
Check that your rout...
Ensure you have the most current version of iLive Editor [1] installed
on your Mac. In some instances customers have had issues connecting
to their iLive MixRacks
and control surfaces when the built in OS X Firewall is turned on.
To turn off the Mac fi...
If you are having trouble launching iLive Editor V1.9 [1]
first confirm you are using an approved version of Java distributed
via software update.
To confirm your Java version launch Terminal and type the command
java -version
If you have update...
Q:
My Touchscreen Computer (SBC) has stopped working - what can I do?
A:
In the unlikely event of your Touchscreen Computer failing you should
in the first instance contact your dealer or local distributor
to take the necessary steps to diagnose the...
You can run two computers with iLive Editor software onto an iLive
system
[but not 2 x iLive Editor sessions on 1 laptop].
We are preparing information for V1.6 and this will be available
shortly.
basically it allows two MixRacks to connect to one ...
There are many software applications that can detect Wi-Fi
interference;
one of the best known applications is IN_SSID_ER
[HTTP://EN.WIKIPEDIA.ORG/WIKI/SERVICE_SET_(802.11_NETWORK)].
[http://www.metageek.net/products/inssider
[http://www.metageek.net/pro...
All our apps work across a wide range of modern routers and Access
Points. However, we do recommend some key features when choosing your
device:
* Good wireless coverage (802.11n or 802.11ac with 'beamforming'
are recommended)
* Dual band wireless f...
