RSS Feed
Knowledgebase : iLive Digital Series

Please note the following information in relation to the forthcoming iLive MixPad v1.9 release in relation to iLive Modular Series hardware: MixPad V1.9 will require firmware V1.9. Firmware V1.9 requires the DSP RackExtra Two card to run on Modular iL...
NOV 2012 V.1.9 is a major new feature release for iLive Modular and Fixed Format systems. [http://www.allen-heath.com/media/iLive-firmware-V1.9-Important-Notes.pdf] [http://www.allen-heath.com/UK/SoftwareDocuments/iLive%20firmware%20V1.9%20Important%2...
We have recommended certain peripheral hardware devices and verified they worked at the time of testing.* * Please take into consideration the fact that these devices are made by 3rd party manufacturers, and the specifications of components can change, ...
< Please see 'Allen "> All 3 elements of an iLive system, the iDR MixRack, the Surface CPU and the Touchscreen computer, can have their network settings reset to the factory default. We recommend that all 3 resets are performed to ensure that all the ...
Available to order via your dealer or local distributor [1] PART NO. DESCRIPTION AP6861 DUST COVER ILIVE 80 AP6862 DUST COVER ILIVE 112 AP6863 DUST COVER ILIVE 144 AP6864 DUST COVER ILIVE 176 AP7148 DUST COVER ILIVE T80 AP7399 DUST COVER ILI...
iLive OneMix is a cut down version of the iLive MixPad app that locks control to a single Aux mix. Multiple iPads may be set up by the 'Admin' user to give each musician customised personal monitor control via Wi-Fi connection to iLive without the...
iLive MixPad and iLive Tweak Version 1.9 will only work with iLive systems running V1.9 firmware. iLive MixPad and iLive Tweak V1.8 will only work with iLive systems running V1.8 firmware. Once updated to V1.9, iLive MixPad and iLive Tweak cannot ...
The main differences between iLive and iLive-T are: * iLive-T surfaces and the iDR-32 and iDR-48 MixRacks have fixed I/O in number type and location. iLive has slots for 8-channels of I/O analogue / digital / multi which can be changed before boot-up. ...
If you are having trouble launching iLive Editor V1.9 [1] first confirm you are using an approved version of Java distributed via software update. To confirm your Java version launch Terminal and type the command java -version If you have update...
Q: Our customer uses 2 iLive systems with 2 MixRacks and 2 consoles in FoH+Monitor mode. He is going to use ME-1 system [1]. So is it possible to connect in this system ME-1? If yes - then how? A: If he is using 2 iLives in FOHMONS then probably he ...
Trigger a preset recall in an iDR-4 or iDR-8 from an iLive system. PDF instructions: see attached iLive iDR-4 iDR-8 Recall an iDR-4 or iDR-8 preset from an iLive system. Includes PL-7 display of iLive status. keywords: idr4 idr8 pl7 pl-7
M-DSPDUAL-A DSP - RackExtra TWO module for iDR10 M-DSPDUAL-0-A DSP - RackExtra TWO module for iDR0 (different codes as metalwork is different sizes) Please note - V1.8 and lower firmware will not run on modular iLive iDR10 and iDR0 MixRacks upgr...
NB: THIS ARTICLE IS BASED ON THE AIRPORT EXPRESS 802.11G, NOT THE LATER 802.11N OR SUBSEQUENT AIRPORT REVISIONS. How to configure an Apple Airport Express unit for use with an iLive or GLD system: Please follow the instructions below to configure an A...
Allen & Heath can provide a range of pre-assembled, approved CAT and fibre cables. Please see here [http://www.allen-heath.com/ahproducts/cat5/] for more information. Recommended Cables for A&H digital mixers Different cables are used with our mixers d...
All our apps work across a wide range of modern routers and Access Points. However, we do recommend some key features when choosing your device: * Good wireless coverage (802.11n or 802.11ac with 'beamforming' are recommended) * Dual band wireless f...
SURFACE METHOD If you have an iLive surface connected to your iDR mixrack then follow these instructions: * Insert a USB key into a spare USB socket on the surface * Press the UTILITY button * Press the DIAGNOSTICS button (on screen) * Press th...