Please note the following information in relation to the forthcoming
iLive MixPad v1.9 release in relation to iLive Modular Series
hardware:
MixPad V1.9 will require firmware V1.9.
Firmware V1.9 requires the DSP RackExtra Two card to run on Modular
iL...
NOV 2012
V.1.9 is a major new feature release for iLive Modular and Fixed
Format systems.
[http://www.allen-heath.com/media/iLive-firmware-V1.9-Important-Notes.pdf]
[http://www.allen-heath.com/UK/SoftwareDocuments/iLive%20firmware%20V1.9%20Important%2...
We have recommended certain peripheral hardware devices and verified
they worked at the time of testing.*
* Please take into consideration the fact that these devices are made
by 3rd party manufacturers,
and the specifications of components can change, ...
< Please see 'Allen ">
All 3 elements of an iLive system, the iDR MixRack, the Surface CPU
and the Touchscreen computer,
can have their network settings reset to the factory default.
We recommend that all 3 resets are performed to ensure that all the
...
Available to order via your dealer or local distributor [1]
PART NO. DESCRIPTION
AP6861 DUST COVER ILIVE 80
AP6862 DUST COVER ILIVE 112
AP6863 DUST COVER ILIVE 144
AP6864 DUST COVER ILIVE 176
AP7148 DUST COVER ILIVE T80
AP7399 DUST COVER ILI...
iLive OneMix is a cut down version of the iLive MixPad app that locks
control to a single Aux mix.
Multiple iPads may be set up by the 'Admin' user to give each
musician customised personal monitor control
via Wi-Fi connection to iLive without the...
iLive MixPad and iLive Tweak Version 1.9 will only work with iLive
systems running V1.9 firmware.
iLive MixPad and iLive Tweak V1.8 will only work with iLive systems
running V1.8 firmware.
Once updated to V1.9, iLive MixPad and iLive Tweak cannot ...
The main differences between iLive and iLive-T are:
* iLive-T surfaces and the iDR-32 and iDR-48 MixRacks have fixed I/O
in number type and location.
iLive has slots for 8-channels of I/O analogue / digital / multi which
can be changed before boot-up.
...
If you are having trouble launching iLive Editor V1.9 [1]
first confirm you are using an approved version of Java distributed
via software update.
To confirm your Java version launch Terminal and type the command
java -version
If you have update...
Q:
Our customer uses 2 iLive systems with 2 MixRacks and 2 consoles in
FoH+Monitor mode.
He is going to use ME-1 system [1]. So is it possible to connect in
this system ME-1?
If yes - then how?
A:
If he is using 2 iLives in FOHMONS then probably he ...
Trigger a preset recall in an iDR-4 or iDR-8 from an iLive system.
PDF instructions: see attached
iLive
iDR-4 iDR-8
Recall an iDR-4 or iDR-8 preset from
an iLive system.
Includes PL-7 display of iLive status.
keywords: idr4 idr8 pl7 pl-7
M-DSPDUAL-A DSP - RackExtra TWO module for iDR10
M-DSPDUAL-0-A DSP - RackExtra TWO module for iDR0
(different codes as metalwork is different sizes)
Please note - V1.8 and lower firmware will not run on modular iLive
iDR10 and iDR0 MixRacks upgr...
NB: THIS ARTICLE IS BASED ON THE AIRPORT EXPRESS 802.11G, NOT THE
LATER 802.11N OR SUBSEQUENT AIRPORT REVISIONS.
How to configure an Apple Airport Express unit for use with an iLive
or GLD system:
Please follow the instructions below to configure an A...
All our apps work across a wide range of modern routers and Access
Points. However, we do recommend some key features when choosing your
device:
* Good wireless coverage (802.11n or 802.11ac with 'beamforming'
are recommended)
* Dual band wireless f...
Allen & Heath can provide a range of pre-assembled, approved CAT and
fibre cables. Please see here
[http://www.allen-heath.com/ahproducts/cat5/] for more information.
Recommended Cables for A&H digital mixers
Different cables are used with our mixers de...
SURFACE METHOD
If you have an iLive surface connected to your iDR mixrack then follow
these instructions:
* Insert a USB key into a spare USB socket on the surface
* Press the UTILITY button
* Press the DIAGNOSTICS button (on screen)
* Press th...