RSS Feed
Knowledgebase : Discontinued Products > ML Series
(10)ML3000

Q: What is the best output to use for a stereo recording on the ML4000? We're currently using the Local Monitor Outs at my church, but my opinion is that we should be using the main outputs as this is the purest signal. A: Using the Local Monitor Out...
It is possible to modify the direct out from post-fade to pre-fade by adjusting jumper settings, as illustrated in the Block Diagrams in the User Guides. (jumpers J4/J5/J6) As these are discontinued models, the Service Manual and schematics should b...
Being 'firmware' rather than computer software, there weren't ever any officially published release notes for ML software version V1.40. The main functional difference is the extra MIDI functionality from the input PAFL switches, but there was also a ...
Many Allen & Heath products can have their busses linked so as to expand input/output capability. We call this Sys-Link(tm) and it requires the purchase and fitting of special PCBs to each mixer. The signals are presented on D connectors on the rear of...
The Master and Slave both require their own distinct Sys-Link(tm) option card. - Please see attached chart If you have any questions please contact your dealer or local Allen & Heath distributor [http://www.allen-heath.com/distributors] keywords: SysLink...
RPSD Combiner for two 5 pin MPS / RPS PSUs RPSD2 Combiner and conditioner for two RPS11 10 pin PSUs This is a discontinued product, the User Guide is available in the Old Products section of our website [http://www.allen-heath.com/ahproducts/rpsd-rpsd2...
An LED alternative for replacing the incandescent bulbs in the ML and GL series mixer meterbridges. This can be fitted to the individual meters in the mixer as an alternative to fitting the Meter bulb * The cost of the LED option is also cheaper than ...