We have recommended certain peripheral hardware devices and verified
they worked at the time of testing.*
* Please take into consideration the fact that these devices are made
by 3rd party manufacturers,
and the specifications of components can change, ...
Q:
Our customer uses 2 iLive systems with 2 MixRacks and 2 consoles in
FoH+Monitor mode.
He is going to use ME-1 system [1]. So is it possible to connect in
this system ME-1?
If yes - then how?
A:
If he is using 2 iLives in FOHMONS then probably he ...
For parallel connection of multiple ME-1 mixers, a Layer 2 network
switch can be used, provided it supports Fast Ethernet (100Base-TX)
connections.
Layer 3 & 4 protocols including Spanning Tree, Tagged Egress Packets,
and Broadcast Storm Protection can ...
Layer 2 network switches and media converters can be used, provided
they support Fast Ethernet (100Base-TX) connections (ACE and dSNAKE
are Ethernet 802.3 IEEE [http://en.wikipedia.org/wiki/IEEE_802.3]
Layer 2 compliant)
Typical applications include par...
The following are ME-1 system latency measurements using 'input direct
out' as the source and the 'Monitors' output on GLD.
GLD / dSNAKE: AR2412 Input to ME-1 Output:
1.21 ms
GLD / Aviom mode: AR2412 Input to ME-1 Output:
1.21 ms
iLive ...
Allen & Heath can provide a range of pre-assembled, approved CAT and
fibre cables. Please see here
[http://www.allen-heath.com/ahproducts/cat5/] for more information.
Recommended Cables for A&H digital mixers
Different cables are used with our mixers de...
ME-1, the GLD Monitor Out, M-MMO card and MultiOut module are
compatible with the original Pro16 protocol.
Compatible AVIOM products include the A-16II personal mixer (but not
the older A-16 mixer, nor the new A360), AN-16/I Input interface, and
A-16D P...