GOLD PHONO SHORTING PLUGS connected to any RIAA inputs that are not
connected to (and thus correctly terminated by) record decks /
turntables with magnetic cartridges?
Caution - If shorting plugs are inserted in the soundcard outputs,
this results in ver...
ILIVE ENGINEERS TOOL KIT SUPPLIED WITH
ILIVE-80/ILIVE-112/ILIVE-144/ILIVE-176
part no. description
003-861 BAG ACCESS'S POUCH ILIVE
contents:
AA6869 TOOL IDR-10 MODULE EXTRACTOR
AH8823 CABLE CAT5 STP 2M XLR-XLR
AT7278 TORX FOLD UP SET
AN7279 BAG ...
Care should be taken not to mistakenly insert a USB lead (or any other
objects) into the X:Link (RJ45) socket
found at the back of a Xone:DB4, Xone:DB2, Xone:23C or Xone:K2, as
this can damage the pins and prevent X:link pairing
or cause intermittent sig...
The Direct outputs are ideal sources for the ICE-16D.
Balanced or unbalanced signals can be handled by the input circuit of
the ICE-16D.
Ready made D-Sub cable assemblies are available from audio equipment
suppliers and electronic component retailers.
...
To order a new 12V switch-mode power supply, please contact your local
dealer or A&H local distributor
part number AM6905
keywords - xone22 xone2D xone:2D Xone:DX XoneDX X22 X2D DXD PSU
wallwart ME1 universal switchmode SMPS
AES Digital Output Option available for iDR-16
[http://www.allen-heath.com/UK/Products/Pages/ProductDetails.aspx?CatId=iLiveSeries&ProductId=iDR16&SubCatId=MixRacks],
iDR-32
[http://www.allen-heath.com/UK/Products/Pages/ProductDetails.aspx?CatId=iLiveSeri...
Third-party locking IEC mains cables can be used for securing the
power source to our products.
Those that work with universal inlets are suitable, manufacturers
include IEC Lock [http://www.ieclock.co.uk/index.html] and Schaffner
[http://www.google.com/...
The PSU is supplied with the mixer.
If you need to order a replacement please contact your dealer or local
distributor [http://www.allen-heath.com/distributors]
Part number: AM9260 (PSU MODULE INLINE 12V 30W 2.5A)
The switched-mode universal power sup...
The WZ20S' standard mono or stereo channel faders can be changed for
replacement ALPS K-fader with integral micro-switches at the bottom of
the fader travel.
These micro-switches can then be wired in an appropriate fashion (so
that the contacts are eith...
A&H part number AH6443
USB 2.0 Cable Type A Male to Type B Male
Please order via your dealer or local A&H distributor
https://en.wikipedia.org/wiki/USB [https://en.wikipedia.org/wiki/USB]
The standard-A USB connection - found on USB memory stick / f...
A 2m USB A - USB B lead is provided with the unit.
Should you need to order a replacement, please contact your dealer or
local A&H distributor
Part Number: AH8752 (CABLE USB A-B 2M)
keywords: Xone:23C Xone23C X23C
Allen & Heath can provide a range of pre-assembled, approved CAT and
fibre cables. Please see here
[http://www.allen-heath.com/ahproducts/cat5/] for more information.
Recommended Cables for A&H digital mixers
Different cables are used with our mixers d...
This is no longer available, but more information is available on the
GL3300 product page:
http://www.allen-heath.com/uk/Products/pages/ProductDetails.aspx?catId=&ProductId=GL3300">See
fitting note: GL3300 8GD fit AP3222_2.pdf
Kit Part No: GL3300...
PL-3, PL-4, PL-12
Brushed Aluminium Wallplate for use with PL-3, PL-4, PL-12
and the discontinued PL-1 and PL-2
part no. - country
AA5029 - UK *
AA5030 - US
AA5250 - EU
PL-8
Brushed Aluminium Wallplate
part no. - country
AA5275 - EU
AA5276 - U...
Hole Plugs are provided for front and rear panel control lockout.
Control knobs may be removed and the front panel holes plugged to
prevent the operator changing the settings.
Additional information available in the User Guides GR2
[http://www.allen-he...
