RSS Feed
Knowledgebase : iDR Series > iDR System Manager
1. Each iDR on a network will send a broadcast once per second. Each iDR that "hears" this broadcast will reply with a directed UDP message. The data payload of the broadcast packet is 12 Bytes, which gives a total Ethernet packet size of 60 Bytes (8 f...
Q: Can the iDR unit's Real Time Clock compensate automatically for changes to the time caused by Daylight Savings Time, or is a service call to the job site necessary to connect and change the iDR clock so that the scheduled events remain accurate? ...
Q: I have been running an iDR4 based system for some time now and am very pleased with it. However, I now need to change the laptop I use to run the System Manager and have a set of archived configurations that I need to transfer to the new computer, but ...
For instructions on how to connect to an iDR-4 / iDR-8 over the internet: Please Click Here [1] keywords: idr4 idr8 Links: ------ [1] http://109.203.103.60/tech/iDR/iDR_4%20iDR_8%20connecting%20to%20an%20iDR%20over%20the%20internet%20kb%20arti...
Problem - PL Client [1]: Not loading DRD file Solution - Remove spaces from the .drd file name keywords: iDR plclient Links: ------ [1] http://www.allen-heath.com/uk/products/pages/subLinkdetails.aspx?catid=iDRSeries&sid=9
How to set up an offline Telnet session: 1. Start an offline System Manager session (i.e. connect to an offline iDR-8 or iDR-4). 2. From the Start Menu select Run... 3. In the box type CMD 4. From the DOS prompt type TELNET 5. From the Mic...
iDR System Manager: [1] Minimum specs: Pentium 2 128Mb RAM 10Mb Hard Disc space keywords: iDR4 iDR8 iDR-4 iDR-8 PC specs Links: ------ [1] http://www.allen-heath.com/uk/Products/Pages/SubLinkDetails.aspx?CatId=iDRSeries&SID=11
Q: I have Vista Business System, 32Bites on my lapton. I had IDR System Manager, ver. 3.72 installed and it worked on my computer. Unfortunately yesterday morning, some automatic updates for Vista have been installed on my computer and after that, IDR ...
Q: I am sending a custom MIDI string when recalling a preset. This is OK but every time the iDR recalls any preset, it sends a MIDI command that I do not want. A: You need to change the default MIDI channel on the iDR-8 In System Manager, go to F...
Q: I'm having problems assigning or unassigning a PL-11 in System Manager A: From firmware version 1.71 it is possible to assign PL-11 from the communications options menu. Once assigned, if an older version configuration is loaded, the older configu...
iDR systems can be controlled via a PC using PL Client [1], an interface which can be designed in PL Designer. PL Client is a lite version of iDR System Manager, so a customer does not have access to the full tools offered by iDR System Manager. The...
If you're looking to control the iDR from an existing PC network then the PL Client [1] software may be of interest. This is a virtual-wallplate GUI controlling levels, mutes and patches etc. which can be run on a user's machine, for local controls, or ...
Q: Where can I find the RS232 codes for using iDR with AMX and Crestron controllers? A: This information is detailed in the iDR Sys-Net Control Protocol document which is viewable from the iDR System Manager program group in the Start Menu. The MI...
Q: I have an iDR-8 with SW version 3.6 beta, and PC with v3.61. iDR-8 will not communicate either via ethernet or serial port. In either case, the Preferences dialogue gives no options for comms port selection or updating code. Cannot find V3.6beta o...
The PL Calculator is a Microsoft Excel spreadsheet that calculates the viability of a PL network. For more information see the "Using PL Calculator" pdf file available to download in the documents section on the product pages for iDR-4 [http://www.alle...
"HyperTerminal was initially bundled with Windows 95, and subsequently all versions of Windows up to and including Windows XP. Starting with Windows Vista, Microsoft no longer bundled HyperTerminal, thus Windows 7 does not include it either. [1] Th...