RSS Feed
Knowledgebase : ZED Series

This article applies to Qu and ZEDi series mixers only. System requirements and instructions for the Windows USB Audio Drivers are specified in the driver Help Manuals. This is available from the driver section of the product Software pages. For USB a...
The USB series of ZED mixers are capable of recording TWO CHANNELS OF AUDIO TO YOUR DAW SIMULTANEOUSLY. You can change the USB record bus assignment to AUX or Master L-R but the two channel recording restriction still applies, it's an either / or sc...
Setting up Pro Tools 9 (or higher) for recording with a ZED Mixer in OS X see attached June 2011 keywords: mac os x protools avid apple macintosh osx
Setting up Pro Tools 9 (or higher) for recording in Windows The default USB Audio Codec driver used by the ZED series (apart from the ZED-R16) is not directly supported by Avid's Pro Tools. If you want to use your ZED with Pro Tools 9 or higher yo...
In Windows 7 the generic USB audio driver has been changed and the audio input defaults to a 1 channel input with high gain for use with a microphone. When using the soundcard installed in the Zed range some changes have to be made: Go to Control pane...
Q: My signal appears low when recording to my DAW, is this normal? A: All of the ZED mixers are analogue and have the ability to record via USB or FireWire, taking your audio in to the digital realm. Analogue and digital do not use the same reference ...
We have identified an issue whereby some ZED-R16 users may experience distorted audio on the LR 17-18 digital sends and ADAT I/O using driver version 4.2.0. THIS ISSUE HAS BEEN RESOLVED, PLEASE UPGRADE TO THE LATEST VERSION.
To configure your Allen & Heath desk for use with an external FX processor carry out the following steps. * Connect an Aux* output to the mono or left input of your external FX processor. * Connect the stereo LR returns from your FX processor to a s...