GL4800 versions [1] of below ARE backwardly compatible. MONO I/P STEREO I/P GROUP 1-4 GROUP 5-8 GROUP L-R MONO PCB ------------------------------------------------------------------------------------------------- GL4000 versions...
Available to order via your dealer or local Allen & Heath distributor [1] part no. description AP4244 DUST COVER GL4000 48CH keywords: accessories accessory soft dustcover Links: ------ [1] http://www.allen-heath.com/distributors
The RPS11 [1] power supply - was available with a choice of connections, depending on which desk it is powering. RPS11 Cable part no. 002-223 (10 Pin Male to 10 PIN Female output) RPS11-3C Cable part no. 002-225 (10 Pin Male to 5 PI...
The Master and Slave both require their own distinct Sys-Link(tm) option card. - Please see attached chart If you have any questions please contact your dealer or local Allen & Heath distributor [http://www.allen-heath.com/distributors] keywords: SysLink...
RPSD Combiner for two 5 pin MPS / RPS PSUs RPSD2 Combiner and conditioner for two RPS11 10 pin PSUs This is a discontinued product, the User Guide is available in the Old Products section of our website [http://www.allen-heath.com/ahproducts/rpsd-rpsd2...
An LED alternative for replacing the incandescent bulbs in the ML and GL series mixer meterbridges. This can be fitted to the individual meters in the mixer as an alternative to fitting the Meter bulb * The cost of the LED option is also cheaper than ...
To configure your Allen & Heath desk for use with an external FX processor carry out the following steps. * Connect an Aux* output to the mono or left input of your external FX processor. * Connect the stereo LR returns from your FX processor to a s...