We have recommended certain peripheral hardware devices and verified
they worked at the time of testing.*
* Please take into consideration the fact that these devices are made
by 3rd party manufacturers,
and the specifications of components can change, ...
ICE-16 [1] units cannot be connected point to point over FireWire for
linked direct to USB recording,
the sync ports must be used for this.
You can daisy chain multiple ICE-16 [2] units on the same FireWire
buss when using a PC / Mac.
The dedicated...
Yes, you can copy your own multitrack session files to use with the
ICE-16 / ICE-16D [1].
You must use the folder structure (Record > Song_x) when adding your
own Wav files.
The important point to understand is that ICE-16 will playback your
tracks
s...
ICE-16 [1] / ICE-16D [2] is a 16 channel fixed format recorder
and records 16 channels of audio regardless of how many channels are
actually in use.
It is not possible to record arm / disarm individual tracks.
keywords: ice16 ice-16 ice16d ice-16...
When used as a standalone USB recorder the ICE-16 / ICE-16D [1] does
not have analogue pass through,
this means that the analogue inputs are not mirrored to the analogue
outputs.
To monitor incoming audio signals you must use the headphones
and assi...
The USB and FireWire ports on the rear of the ICE-16 are
only available when using the device as an audio interface via a DAW
and drivers.
The front USB connection is used for all USB based standalone
recording ">Connecting a USB memory device into...
The monitoring section on the ICE-16 [1] / ICE-16D [2] is very
similar to PFL on a mixer,
it allows you to listen to the incoming mono signal(s),
those of which are selected using the monitor select switches on the
front of the unit.
It is not possi...
The ICE-16 [1] / ICE-16D [2] is a line level recording device,
it does not have any microphone preamps
You can connect devices like mixer direct outs, external preamps etc
directly to the unit.
keywords: ICE-16 ICE-16D ICE16 ICE16D pre-amp
Links:
-...
This is short for "Slow" and is explained in the User Guide
available to download from the A">p.17: [1] or display 'SLo' if the
memory device does not have sufficient speed to cope with the data
rate with the memory format.
This may well be because the...
FireWire (IEE1394 [1]) is a daisy-chainable protocol, you can have up
to 64 FireWire devices on a single FireWire bus.
Two ICE-16 units can be connected via Firewire to expand i/o. Two
ICE-16 units connected via Firewire will be seen by your DAW as ...
ICE-16 [http://www.allen-heath.com/ice-16] & ICE-16D
[http://www.allen-heath.com/uk/Products/Pages/ProductDetails.aspx?catId=ICE16&ProductId=ICE16D&SubCatId=]
will only record / play standard wave files (.wav)
[http://en.wikipedia.org/wiki/WAV]
and _is ...
ICE-16 and ICE-16D are Core Audio compliant, so no drivers are
required for Apple Mac computers.
Simply connect your ICE to your Mac and follow the instructions in the
User Guide.
For use with a PC, drivers are available for 32bit or 64bit MS Windows
PC...
A Mini DIN 8 pin lead* of not more than 2 metres in length
is needed for each unit to be synchronised to the master unit.
Available to order from your dealer or local Allen & Heath distributor
part code - description
AH9556 - CABLE DIN MINI8P-MINI8P 1...
