Knowledgebase : Discontinued Products > ML Series > ML5000
It is possible to modify the direct out from post-fade to pre-fade by adjusting jumper settings, as illustrated in the Block Diagrams in the User Guides. (jumpers J4/J5/J6) As these are discontinued models, the Service Manual and schematics should b...
Being 'firmware' rather than computer software, there weren't ever any officially published release notes for ML software version V1.40. The main functional difference is the extra MIDI functionality from the input PAFL switches, but there was also a ...
Available to order via your dealer or local Allen ">keywords: accessories accessory soft dustcover Links: ------ [1] http://www.allen-heath.com/distributors
Many Allen & Heath products can have their busses linked so as to expand input/output capability. We call this Sys-Link(tm) and it requires the purchase and fitting of special PCBs to each mixer. The signals are presented on D connectors on the rear of...
The Master and Slave both require their own distinct Sys-Link(tm) option card. - Please see attached chart If you have any questions please contact your dealer or local Allen & Heath distributor [http://www.allen-heath.com/distributors] keywords: SysLink...
An LED alternative for replacing the incandescent bulbs in the ML and GL series mixer meterbridges. This can be fitted to the individual meters in the mixer as an alternative to fitting the Meter bulb * The cost of the LED option is also cheaper than ...
Q: Please can confirm the different lengths available of the 7 pin DC power cables for the RPS14 PSU? A: These are available in 2 lengths - LONG (2.9m) 7 PIN MALE - MALE DC POWER CABLE PART NO. 002-583 SHORT (0.75m) 7 PIN MALE - MALE DC POWER CABLE P...