RSS Feed
Knowledgebase : PA Series
(3)PA12
(2)PA20
(2)PA28

Firstly please try performing a reset on the FX board; Turn on the mixer whilst holding the 'select' button, this will usually restore functionality. If the FX are still unresponsive please contact your local A">keywords PA12 PA12-CP PA12CP PA20 PA2...
There's no reason why this shouldn't work. You can 'patch in' the controller by connecting the Slave Outputs of the PA to the inputs of the controller, and take the outputs from the controller to the AMP In connectors, thereby putting the controller in...
The PA EQ Visualizer is a virtual display to help you understand the action of the A B master output parametric EQ on your PA series mixer. Running the EQ Visualizer on a laptop: as you set the controls on the PA mixer EQ, apply the same settings to...
Q: I would like to run an extra set of sub speakers on the same amplifier output but the speaker impedances are different, will this work? A: No, when the PA-CP amplifiers are set to the 8ohm constant power setting, each speakON output is designed ...
NOTE: PA FX EDITOR ONLY works with OLDER units that have a GREEN FX LED. New style units with a yellow FX LED are not compatible with FX Editor software. The PA FX Editor is a 32 bit PC application for editing the built-in effects on the Allen & Heath ...
To configure your Allen & Heath desk for use with an external FX processor carry out the following steps. * Connect an Aux* output to the mono or left input of your external FX processor. * Connect the stereo LR returns from your FX processor to a s...