​The RPS11 [1] is a linear power supply for the GL Series [2] (GL2400 [3], GL2800 [4], GL3800 [5]) Veteran Products: The RPS11 can be used as an alternative power supply for the following discontinued products ML3000, GL4000, GL4800 or the RPS11 3...
The GL3300 XLR outputs are all balanced. The balanced option applies to the Aux jack outputs. If the XLRs are giving low signal, the problem could be: - Disconnect all cables from the group inserts. Does this solve the problem? If a single XLR...
This URL takes you to a PDF that details the change from Panasonic to Alps faders on GL2800 GL2800M and includes some GL3300 serial numbers Please Click Here
Available to order via your dealer or local Allen ">part no. description AP4238 DUST COVER GL3300 24CH keywords: accessories accessory soft dustcover Links: ------ [1] http://www.allen-heath.com/distributors
The RPS11 [1] power supply - was available with a choice of connections, depending on which desk it is powering. RPS11 Cable part no. 002-223 (10 Pin Male to 10 PIN Female output) RPS11-3C Cable part no. 002-225 (10 Pin Male to 5 PI...
The Master and Slave both require their own distinct Sys-Link(tm) option card. - Please see attached chart If you have any questions please contact your dealer or local Allen & Heath distributor [http://www.allen-heath.com/distributors] keywords: SysLink...
An LED alternative for replacing the incandescent bulbs in the ML and GL series mixer meterbridges. This can be fitted to the individual meters in the mixer as an alternative to fitting the Meter bulb * The cost of the LED option is also cheaper than ...
To configure your Allen & Heath desk for use with an external FX processor carry out the following steps. * Connect an Aux* output to the mono or left input of your external FX processor. * Connect the stereo LR returns from your FX processor to a s...