​The RPS11 [1] is a linear power supply for the GL Series [2] (GL2400 [3], GL2800 [4], GL3800 [5]) Veteran Products: The RPS11 can be used as an alternative power supply for the following discontinued products ML3000, GL4000, GL4800 or the RPS11 3...
Q. Is it possible to have balanced Aux sends on the GL2200? A. You can achieve balanced aux sends by using the monitor mode, reassigning the auxes via the group faders and the group outs. The groups then get controlled via the aux masters and outpu...
Q. Are the direct outs on the GL2200 pre or post-EQ? A. The direct outs on the GL2200 are post fade / EQ when it leaves the factory. However there are link options inside to change this to a pre fade output which would be desirable for connection to...
The Master and Slave both require their own distinct Sys-Link(tm) option card. - Please see attached chart If you have any questions please contact your dealer or local Allen & Heath distributor [http://www.allen-heath.com/distributors] keywords: SysLink...
An LED alternative for replacing the incandescent bulbs in the ML and GL series mixer meterbridges. This can be fitted to the individual meters in the mixer as an alternative to fitting the Meter bulb * The cost of the LED option is also cheaper than ...
To configure your Allen & Heath desk for use with an external FX processor carry out the following steps. * Connect an Aux* output to the mono or left input of your external FX processor. * Connect the stereo LR returns from your FX processor to a s...