RSS Feed
Knowledgebase : Xone Series > Xone:S2
GOLD PHONO SHORTING PLUGS connected to any RIAA inputs that are not connected to (and thus correctly terminated by) record decks / turntables with magnetic cartridges? Caution - If shorting plugs are inserted in the soundcard outputs, this results in ver...
Q: Why is it that the Line level input on the Mic 1 and 2 sends still goes to a record out. I thought the record was a cleanfeed and did not include the Microphone channels? A: On the Xone:62 and Xone:92 models, the mic feed to the booth is a cleanf...
Q: Is there a way to defeat the booth attenuation that occurs when I engage the Mic Level inputs? Perhaps a jumper setting? I noticed it does not happen when I do it with the line level inputs on the mic channels. A: The Monitor Dim when Mic is selec...
If your Xone Mixer has a Penny + Giles crossfader, all use the same model: AI4222 P">Note The crossfader knob is sold separately: AJ5320 P"> There are some spare parts for the crossfader that can also be purchased individually: AI5291 FADER SPA...
Options available to * Convert RIAA stage (phono input) to line level. * Disable Filter On switch * Change the USB Audio input feed from the RCA sockets on the rear panel (default) to the internal left/right mix buss Please see the User Guide...
In Windows 7 the generic USB audio driver has been changed and the audio input defaults to a 1 channel input with high gain for use with a microphone. When using the soundcard installed in the Zed range some changes have to be made: Go to Control pane...
The Xone:S2 [http://www.allen-heath.com/uk/Products/Pages/ProductDetails.aspx?CatId=XoneSeries&ProductId=XoneS2] can be ordered with either rotary or linear faders. The plates are interchangeable and can be ordered separately. Converting from one type ...
The knob caps for the rotary faders are not push fit but secured with a collet, washer and nut. They are the same parts as used for the Wet/Dry Control knobs on the Xone:DB2 and Xone:DB4 If you need to remove, tighten or adjust, please see this related k...
The knob caps used for the Xone:DB2 [http://xone.co.uk/db2] and Xone:DB4 [http://xone.co.uk/db4] * Wet/Dry Control are secured with a collet, washer and nut. All the other knob caps used on the mixer are push fit. Care should be taken not to try and rem...