RSS Feed
Knowledgebase : Audio Networking > Waves
We have been made aware of a potential situation whereby digital noise may occur when using the M-Waves card [1] with an iLive system. [2] THIS ISSUE HAS BEEN RESOLVED IN WAVES V9 AND M-WAVES FIRMWARE VERSION 1.10.8. Please note that Waves V9 currently...
We have seen problems occur when updating the firmware with some early Waves module cards [http://www.allen-heath.com/ahproducts/waves/]. The logs have shown that a different firmware version has been allocated to the card, one associated with another ...
Cat5e or Cat6 cables are required, with cable length strictly dependant on cable type. Cat6 allows for up to 70m between the iLive MixRack or GLD-80 mixer and the switch, and 10m between the switch and any SoundGrid Server. Cat5e is limited to much shorte...
No. A computer running SoundGrid MultiRack software is required.
Most applications such as plug-in processing plus playback & recording do not strictly require an external switch, as the card comes with an integrated three-ports switch. When more devices are connected together in a network, a Gigabit Ethernet switch wh...
SoundGrid works with standard ASIO drivers for Windows or the CoreAudio interface for OSX. These are supported by nearly all currently available professional level audio workstations such as Nuendo, Cubase, Reaper, Sonar, Pro Tools 9 and many others.
Channels can be set to record either pre or post MultiRack processing. Playback channels can be set to play pre or post processing. A selection of both pre and post channels can be configured too.
No, SoundGrid uses IPv6 and RAW Ethernet. IPv4 settings do not affect communication between SoundGrid devices.
Yes, this is desirable when a single computer is used for iLive Editor and MultiRack SoundGrid. Your computer must be set to a static IP address compatible with the iLive system.
Yes, though recording and playback with SG Driver is to be avoided due to bandwidth limitations. To prevent issues on the ACE connection, make sure the SG Driver is switched Off and no connections to/from SG Driver are set in MultiRack.
System performance depends on the SoundGrid Server. Server One can run up to 184 C4 or 232 SSL Channel plug-ins and has a throughput latency of 40 samples (less than 1ms). Please note that certain Waves plug-ins need to buffer audio in order to process, r...