Should you need to order a replacement metal blanking plate to cover
the I/O slot when not in use,
please contact your dealer or local distributor [1]
Part no - Description
AA8552 - FRONT PNL GLD RAB2 BLANK
AB8592 - SCREW M3X5 TRUNC CSK TORX
k...
A series of GLD training videos are now available online [1]
keywords - training series gld080 gld-080 gld80 gld-80 gld112 gld-112
Links:
------
[1]
http://www.youtube.com/watch?v=HPr7_tr84zY&list=PLq3_zC_Xz0PgHlZdL6_aljNR1_UxCGGdr
The output channels on a M-MMO card are mapped as follows:
01 - 24 = ADAT
25 - 40 = iDR / HearBus
41 - 56 = Aviom(R) Pro16(R)
keywords: Mini Multi-Out Mini Multi Out
Dante Via is an Audinate software for routing computer-based audio
into Dante networks.
The following are some application examples relating to Allen & Heath
digital mixers.
INTEGRATING A QU MIXER INTO A DANTE NETWORK
The Qu USB audio interface is r...
Q: What type of cable do I use with M-MADI and how far can it run?
A: Non-optical MADI systems use 75ohm Coaxial (video) cable terminated
with BNC connectors.
We tested M-MADI with typical industry cable (Belden 1505A) with
‘Amphenol’ BNC connectors.
W...
Allen & Heath can provide a range of pre-assembled, approved CAT and
fibre cables. Please see here
[http://www.allen-heath.com/ahproducts/cat5/] for more information.
Recommended Cables for A&H digital mixers
Different cables are used with our mixers de...
Cat5e or Cat6 cables are required, with cable length strictly
dependant on cable type. Cat6 allows for up to 70m between the iLive
MixRack or GLD-80 mixer and the switch, and 10m between the switch and
any SoundGrid Server. Cat5e is limited to much shorte...
No. A computer running SoundGrid MultiRack software is required.
Most applications such as plug-in processing plus playback & recording
do not strictly require an external switch, as the card comes with an
integrated three-ports switch. When more devices are connected
together in a network, a Gigabit Ethernet switch wh...
SoundGrid works with standard ASIO drivers for Windows or the
CoreAudio interface for OSX. These are supported by nearly all
currently available professional level audio workstations such as
Nuendo, Cubase, Reaper, Sonar, Pro Tools 9 and many others.
Channels can be set to record either pre or post MultiRack processing.
Playback channels can be set to play pre or post processing. A
selection of both pre and post channels can be configured too.
No, SoundGrid uses IPv6 and RAW Ethernet. IPv4 settings do not affect
communication between SoundGrid devices.
Yes, this is desirable when a single computer is used for iLive Editor
and MultiRack SoundGrid. Your computer must be set to a static IP
address compatible with the iLive system.
Yes, though recording and playback with SG Driver is to be avoided due
to bandwidth limitations. To prevent issues on the ACE connection,
make sure the SG Driver is switched Off and no connections to/from SG
Driver are set in MultiRack.
System performance depends on the SoundGrid Server. Server One can run
up to 184 C4 or 232 SSL Channel plug-ins and has a throughput latency
of 40 samples (less than 1ms). Please note that certain Waves plug-ins
need to buffer audio in order to process, r...
