Knowledgebase : GLD Series > Connectivity
GLD-80. Taking a long time to boot up?
If your GLD-80 is taking a long time to boot (i.e. several minutes), then please check your network settings section when the system has booted. If DHCP is enabled and there is not a DHCP server connected to the system - for example a router with DH...
GLD. What are the default network settings for the GLD?
The default network settings for the GLD-80 (and GLD-112) are as follows: IP Address: 192.168.1.50 Subnet Mask: 255.255.255.0 Default Gateway: 192.168.1.254 keywords: GLD80 GLD112 GLD080 GLD-080
GLD. Training Videos
A series of GLD training videos are now available online [1] keywords - training series gld080 gld-080 gld80 gld-80 gld112 gld-112 Links: ------ [1] http://www.youtube.com/watch?v=HPr7_tr84zY&list=PLq3_zC_Xz0PgHlZdL6_aljNR1_UxCGGdr
GLD. Can I daisy chain two GLD-AR2412 using the Expander port?
No, the expander port on the GLD-AR2412 is for connecting an GLD-AR84 expander unit. Connecting an additional GLD-AR2412 is not recommended or supported. keywords GLD-80, GLD80, GLD-80, GLDAR2412, GLDAR84
Dante Via with A&H digital mixers
Dante Via is an Audinate software for routing computer-based audio into Dante networks. The following are some application examples relating to Allen & Heath digital mixers. INTEGRATING A QU MIXER INTO A DANTE NETWORK The Qu USB audio interface is r...
Can I run dSNAKE through a network switch?
Layer 2 network switches and media converters can be used, provided they support Fast Ethernet (100Base-TX) connections (ACE and dSNAKE are Ethernet 802.3 IEEE [http://en.wikipedia.org/wiki/IEEE_802.3] Layer 2 compliant) Typical applications include par...
ME-1. Latency
The following are ME-1 system latency measurements using 'input direct out' as the source and the 'Monitors' output on GLD. GLD / dSNAKE: AR2412 Input to ME-1 Output: 1.21 ms GLD / Aviom mode: AR2412 Input to ME-1 Output: 1.21 ms iLive ...
Recommended Wi-Fi router
All our apps work across a wide range of modern routers and Access Points. However, we do recommend some key features when choosing your device: * Good wireless coverage (802.11n or 802.11ac with 'beamforming' are recommended) * Dual band wireless f...
ME-1. Can I connect to other audio protocols?
Q: Can I connect to other audio protocols? A: Yes. * Direct connection to GLD dSNAKE [https://www.allen-heath.com/ahproducts/ar2412/] * Direct connection to iLive ACE [https://www.allen-heath.com/ahproducts/ace/] * Direct connection to Aviom® A-...
Recommended cables
Allen & Heath can provide a range of pre-assembled, approved CAT and fibre cables. Please see here [http://www.allen-heath.com/ahproducts/cat5/] for more information. Recommended Cables for A&H digital mixers Different cables are used with our mixers de...