RSS Feed
Knowledgebase : Audio Networking > MMO
Touchscreen output patch bay: when configuring the Stereo Link status of channels assigned to a Multi Output Card, the button affects the wrong channels. Linking channels 1&2 actually links channels 9&10, and visa-versa. Linking channels 3&4 actuall...
The proprietary Allen ">(connection made using Cat5 STP) iDR-4 [2] iDR D-out [3] iDR D-in [4] iDR-Switch [5] iDR Remote Controllers (PL-Series) [6] M-MMO [7] iLive's Digital Multi Output Module [8] Further information is available ...
The following are ME-1 system latency measurements using 'input direct out' as the source and the 'Monitors' output on GLD. GLD / dSNAKE: AR2412 Input to ME-1 Output: 1.21 ms GLD / Aviom mode: AR2412 Input to ME-1 Output: 1.21 ms iLi...
Port A ES mapping (default / reset) is only for the surface I/O 32 channels (plus some for the monitor TB). This is so any user can quickly ensure that surface audio works correctly at anytime. To configure the M-MMO card [1] you will need to run Eth...
The output channels on a M-MMO card are mapped as follows: 01 - 24 = ADAT 25 - 40 = iDR / HearBus 41 - 56 = Aviom(R) Pro16(R) keywords: Mini Multi-Out Mini Multi Out
The Mini Multi Out [1] card is the only option supported in the iLive Surface RAB2 module Port B. Note: The T and R Series Surfaces do not include Port B. For more information please see the document \"M-MMO Option Instructions (can also be used ...
ME-1, the GLD Monitor Out, M-MMO card and MultiOut module are compatible with the original Pro16 protocol. Compatible AVIOM products include the A-16II personal mixer (but not the older A-16 mixer, nor the new A360), AN-16/I Input interface, and A-16D P...