RSS Feed
Knowledgebase : Audio Networking > EtherSound
Q: With iLive modular, and V1.61 firmware, when connecting two MixRacks together for Dual-MixRack function, do the Network Bridge jumpers need to be connected with ACE & Network in each of the MixRacks? Would seem that ACE would need the control func...
'Dual-Rack' is a special setup mode for two iDR MixRacks. It is to expand the number of input channels of an iLive system from 64 channels to 128, mixing to 32 mixes. Any two MixRacks from the iDR family can be combined in this way, the system can then...
The MixRack to Surface link in iLive is always 64 channels bi-directional capability. For this connection you can use currently : A) ES (EtherSound) [1] B) ACE [2] C) MADI [3] The iLive system 'reserves' channels 1-32 in this audio bridge for inpu...
Q: Can I connect to other audio protocols? A: Yes. * Direct connection to GLD dSNAKE [1] * Direct connection to iLive ACE [2] * Direct connection to AviomĀ® A-Net 16 * Connect to other networks via ME-U hub [3]: 48kHz Dante [4] MADI [...
Port A ES mapping (default / reset) is only for the surface I/O 32 channels (plus some for the monitor TB). This is so any user can quickly ensure that surface audio works correctly at anytime. To configure the M-MMO card [1] you will need to run Eth...